Airtac 3V2M Solenoid Valve 3V2MNCC-9F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNCC-9F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageAC110V
- Electrical entryDIN plug (DIN socket type)
- Stations9
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNCC-9F
Nine NC 3/2 poppet valves share one AC110V supply and one wiring run on this 9-station base, with DIN plug entry on every coil. Centralised exhaust means all nine stations vent through a single manifold port, so one silencer handles the whole bank instead of nine separate pipes.
Two engineering facts shape the choice. First, routing the flow path through the base costs flow: Cv 0.1 here against the free-standing 3V2's 0.18, so keep heavy-blow duties off this manifold. Second, the shared exhaust mixes vented air from all stations - useful for compact routing, wrong if one station must be isolated or its venting recovered separately. Each coil takes 7 VA, about 63 VA with all nine energised, and the NC state is fixed at order time.
Airtac 3V2M Solenoid Valve 3V2MNCC-9F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNCC-9F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally closed |
| Item form | Complete assembly — 9 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC110V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNCC-9F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| AC110V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 9F | 9 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNCC-9F Is Used
Belt stopper gates
A conveyor line with nine stop-and-release gates uses one NC valve per gate; energising feeds the stopper cylinder, and the centralised exhaust keeps the whole run's venting on a single duct.
Test bench clamp rack
A leak-test bench cycling nine small clamp cylinders assigns one station per fixture; the shared supply and wiring make a failed fixture easy to spot by which coil drops out.
Carton sealer hold-downs
Nine case hold-down clamps on a packaging machine fire in sequence from one AC110V supply; spring return plus NC valves means every clamp opens the moment the line stops.
Is the Airtac 3V2M Solenoid Valve 3V2MNCC-9F the Right Part?
Confirm the five points: NC initial state (cannot be changed after purchase), AC110V coil, DIN plug entry, nine stations, centralised exhaust; PT is the standard thread, with G and NPT as catalogue options. If a station drives a bigger cylinder or a blow-off that Cv 0.1 cannot feed, put an individual 3V2 (Cv 0.18 at 1/8, 0.19 at 1/4) or a 3V3 (Cv 0.62, 1/4) on that function and keep the 3V2M for the light pilot loads. 3V1 at 3.0 W DC covers small duties at lower power. Double-acting cylinders need the AirTAC 4V 5-port series.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNCC-9F FAQ
3/2 NC valves, Cv 0.1, operating pressure 0-0.8 MPa (0-114 psi), temperature -20 to 70 C, AC110V coil at 7 VA each (about 63 VA for nine), IP65 protection, PT1/8 ports with G and NPT to order.
Centralised exhaust vents all nine stations through one port, which simplifies silencing but mixes station venting; order the -D suffix version if stations need separate exhausts. A 3/2 valve feeds or vents one outlet, so it suits single-acting cylinders only - a double-acting cylinder requires a 5-port valve such as the AirTAC 4V.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNCC-9F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.