Airtac 3V2M Solenoid Valve 3V2MNCE-11F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNCE-11F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageAC24V
- Electrical entryDIN plug (DIN socket type)
- Stations11
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNCE-11F
When a panel needs one more station than a round ten, the 3V2MNCE-11F covers it: eleven NC 3/2 bodies on a single AirTAC 3V2M manifold with a common PT1/8 feed. Because supply and wiring are shared, tracing a dead station is a swap test on one body rather than a rewire of the whole panel.
Each AC24V DIN-plug coil is rated at 7 VA; with all eleven energised the bank asks for roughly 77 VA. Flow through the base is Cv 0.1 per station - the density comes at a small flow cost compared with an individually piped 3V2. Direct-acting poppet construction with spring return, IP65 coils, centralised exhaust. NC is fixed at ordering; there is no field conversion.
Airtac 3V2M Solenoid Valve 3V2MNCE-11F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNCE-11F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally closed |
| Item form | Complete assembly — 11 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNCE-11F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| AC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 11F | 11 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNCE-11F Is Used
CNC pallet fixture grid
On a pallet-pool fixture, eleven stations drive eleven clamp or rest positions from one manifold, and a dead station is diagnosed by swapping a single body on the shared base.
Air-knife blow-off row
A canning line with eleven blow-off nozzles takes one station per nozzle; NC means no nozzle leaks air between containers when the photo-eye signal is off.
Spray booth atomising air
Eleven atomising-air lines across a coating booth each get a spring-return 3/2 station, so a de-energised line vents to exhaust instead of weeping at the gun.
Is the Airtac 3V2M Solenoid Valve 3V2MNCE-11F the Right Part?
Check the five order points against your panel before you commit: NC initial state, AC24V coil, DIN-plug entry, eleven stations, centralised exhaust, and thread - PT is standard, G and NPT are catalogue options. The NC/NO state is sealed in at the factory and cannot be converted later.
Flow is Cv 0.1 per station because air passes through the base; where a circuit needs more, mount an individual 3V2 (Cv 0.18 at 1/8, 0.19 at 1/4) or a 3V3 (Cv 0.62, 1/4) alongside, both vacuum-rated. Light-duty circuits can drop to 3V1 at 3.0 W DC. A double-acting cylinder needs the 5-port AirTAC 4V range, not this 3/2 manifold.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNCE-11F FAQ
Eleven NC 3/2 stations on one base, Cv 0.1 per station, 0-0.8 MPa (0-114 psi), -20 to 70 C, PT1/8, AC24V coils at 7 VA (roughly 77 VA for the full bank energised), IP65 (DIN 40050), centralised exhaust, air filtered to 40 um or finer.
Each station is a 3/2 valve with supply, outlet and exhaust: it controls single-acting spring-return cylinders, clamps, air blow and pilot stages. It does not drive a double-acting cylinder, which needs two outlet ports and therefore the AirTAC 4V series. Note also that 3V2M carries no vacuum rating - do not use it on negative-pressure circuits.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNCE-11F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.