Airtac 3V2M Solenoid Valve 3V2MNCE-12F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNCE-12F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageAC24V
- Electrical entryDIN plug (DIN socket type)
- Stations12
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNCE-12F
Twelve stations is where the 3V2M platform starts replacing a whole cabinet of individual valves. The 3V2MNCE-12F is a 12-station assembly of NC 3/2 bodies with one shared PT1/8 supply and one wiring run, using AC24V DIN coils at 7 VA each - 84 VA if everything is energised together.
Spring-return poppet valves vent the outlet when de-energised, so a loss of control power drops every circuit to a defined state, which suits interlock and clamp duty. IP65 (DIN 40050) protects the coil connections, and centralised exhaust keeps all twelve vents on a single base port. The state is part of the part number: NC cannot be flipped to NO on site.
Airtac 3V2M Solenoid Valve 3V2MNCE-12F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNCE-12F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally closed |
| Item form | Complete assembly — 12 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNCE-12F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| AC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 12F | 12 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNCE-12F Is Used
End-of-arm tooling cluster
A robot EOAT plate with twelve single-acting grippers and blow tips takes one valve station per function, all fed from the base single PT1/8 supply through the wrist.
Dock seal inflate-vent circuits
Loading-dock shelters with multiple inflatable bladders use one NC station per bladder: energise to inflate, de-energise to vent through the shared exhaust port.
Guard interlock venting
A transfer line with twelve guarded access doors uses one station per door lock cylinder; NC wiring means every lock circuit vents in a predictable way when control power is removed.
Is the Airtac 3V2M Solenoid Valve 3V2MNCE-12F the Right Part?
Match five points to the project: NC state, AC24V coil, DIN plug entry, twelve stations, centralised exhaust, and thread - PT as the family standard, with G or NPT available to order. The NC/NO choice is permanent once ordered; no gasket trick converts it.
Cv 0.1 per station suits pilots, clamps and blow, not high-volume air delivery; step a hungry circuit out to a 3V2 (Cv 0.18 at 1/8, 0.19 at 1/4, vacuum-rated) or a 3V3 (Cv 0.62, 1/4), or keep small duties on 3V1 at 3.0 W DC. A double-acting cylinder needs the 5-port AirTAC 4V, not this 3/2 manifold.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNCE-12F FAQ
Twelve 3/2 NC stations on one manifold, Cv 0.1 per station, 0-0.8 MPa (0-114 psi), -20 to 70 C, PT1/8 ports, AC24V DIN coils at 7 VA each - 84 VA if all twelve pull in together - IP65 (DIN 40050), centralised exhaust, air filtration to 40 um or finer.
Yes. State is an ordering choice, not a field adjustment: AirTAC states that flipping the dedicated base gasket does not convert NC to NO. If one station must be normally open, order that station as a NO body - mixed NC and NO valves can share the same base and supply.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNCE-12F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.