Airtac 3V2M Solenoid Valve 3V2MNCE-15F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNCE-15F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageAC24V
- Electrical entryDIN plug (DIN socket type)
- Stations15
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNCE-15F
The 3V2MNCE-15F puts fifteen NC 3/2 direct-acting valves on a single dedicated base, each solenoid rated AC24V and plugged into its DIN socket. Inside every body a coaxial shut-off poppet opens on energise and the spring snaps it closed and vents the outlet on de-energise.
Centralised exhaust is the headline of this 15-station build: all outlets discharge through one common port, so machine designers capture and pipe a single exhaust line rather than fifteen. Add up the coil load for the panel schedule - 15 coils at 7 VA gives 105 VA - and remember the manual override on each body speeds first-article commissioning. The medium is air filtered to 40 um or finer; no lubrication is needed.
Airtac 3V2M Solenoid Valve 3V2MNCE-15F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNCE-15F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally closed |
| Item form | Complete assembly — 15 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNCE-15F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| AC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 15F | 15 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNCE-15F Is Used
Case packer flap hold-downs
Fifteen hold-down pads pressing carton flaps during glue set on a case packer map neatly to fifteen NC stations venting when stopped.
Deburr cell blow-off jets
A plastics deburr cell with fifteen angled air jets can tune each jet's on-time per station while all exhaust collects at one muffler.
Textile loom solenoid panel
Air-jet loom sheds use compact solenoid panels; fifteen AC24V DIN-plug stations keep the low-voltage loom wiring uniform and quick to trace.
Is the Airtac 3V2M Solenoid Valve 3V2MNCE-15F the Right Part?
State, voltage, entry, station count and exhaust are all fixed at order time: this code means NC, AC24V, DIN plug, 15 stations, centralised exhaust. There is no post-purchase conversion - reversing the dedicated base gasket does not turn NC into NO, per the catalogue. Thread is PT as standard on 3V2M; G (BSPP) and NPT are options you specify when ordering.
Density costs flow: Cv 0.1 versus the individual 3V2's Cv 0.18 at 1/8 inch (0.19 at 1/4 inch, vacuum-rated) and the 3V3's Cv 0.62 at 1/4 inch (vacuum-rated). Where a channel drives nothing heavier than a small spring-return cylinder or a jet, stay on the manifold; for large loads go 3V2 or 3V3, and for the lightest duty try 3V1 at 3.0 W DC. Double-acting cylinders need the 5-port AirTAC 4V series.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNCE-15F FAQ
15-station NC 3/2 assembly: Cv 0.1 flow coefficient, 0-0.8 MPa operating pressure, -20 to 70 C temperature range, 7 VA per AC24V coil (DC coils in this family draw 7.0 W), IP65 (DIN 40050), PT1/8 ports, PT base thread with G and NPT available to order, 40 um filtered air, no lubrication required.
Each 3/2 station has three ports (supply, outlet, exhaust) and two states: it either feeds the outlet or vents it. That suits single-acting spring-return cylinders, clamps, air blow and pilot duty. It cannot drive a double-acting cylinder - that takes a 5-port valve such as the AirTAC 4V series.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNCE-15F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.