Airtac 3V2M Solenoid Valve 3V2MNCE-8F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNCE-8F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageAC24V
- Electrical entryDIN plug (DIN socket type)
- Stations8
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNCE-8F
Eight stations on one base make the 3V2MNCE-8F the point where shared wiring starts to pay for itself: one PT1/8 supply line, one common wiring path, and a fault-finding routine that walks the manifold instead of the whole machine. The set comprises eight normally closed 3/2 valve bodies on the 8F base with centralised exhaust, every coil an AC24V 7 VA DIN-plug unit - 56 VA in the worst case.
Each valve is direct-acting with spring return and coaxial poppet shut-off, Cv 0.1, IP65 (DIN 40050), with a manual override for commissioning. Because the valves are NC, all eight outlets sit vented until energised, so a control-power loss leaves clamps and dump lines open to exhaust rather than holding pressure.
Airtac 3V2M Solenoid Valve 3V2MNCE-8F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNCE-8F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally closed |
| Item form | Complete assembly — 8 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNCE-8F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| AC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 8F | 8 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNCE-8F Is Used
Sorting gates on parcel sorters
Switch eight diverter or gate cylinders along a parcel sorter from one manifold, all dumping to exhaust in a power cut.
Printing press impression rollers
Engage and release eight impression or nip rollers across a web press, sequenced station by station from one 24 V AC feed.
Wiring loom clamp fixtures
Hold eight loom segments in a harness jig, every clamp venting open together when coil power is removed.
Is the Airtac 3V2M Solenoid Valve 3V2MNCE-8F the Right Part?
With Cv 0.1 per valve, the 3V2M island trades flow for density, so benchmark each station against an individual 3V2 (Cv 0.18 at 1/8, 0.19 at 1/4, vacuum-rated) or the 3V3 (Cv 0.62, 1/4, vacuum-rated), and 3V1 (3.0 W DC) where coil heat or power draw is the constraint. NC and NO are locked in at order time - the base gasket is dedicated and cannot be reversed to change state.
Confirm on order: NC initial state, AC24V voltage, DIN plug entry, eight stations, centralised exhaust, PT thread (G and NPT available to order). Double-acting cylinders are outside a 3/2 valve's job - specify the AirTAC 4V series for those.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNCE-8F FAQ
Eight NC 3/2 valves on one base: Cv 0.1 per valve, 0-0.8 MPa (0-114 psi), -20 to 70 C, AC24V coils at 7 VA each for 56 VA total worst case, IP65 (DIN 40050), PT1/8 ports, centralised exhaust, DIN plug entry.
The catalogue allows mixing valve types on a 3V2M base, and the initial state of each position is fixed by the valve ordered - NC stays NC, and no gasket reversal or field change converts it. If you need a NO position or more flow at a station, order the matching valve variant; response times, weights and dimensions are confirmed from the datasheet on RFQ.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNCE-8F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.