Airtac 3V2M Solenoid Valve 3V2MNCF-10F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNCF-10F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageDC12V
- Electrical entryDIN plug (DIN socket type)
- Stations10
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNCF-10F
Ten normally closed 3/2 valve bodies sit on one 3V2M base in the 3V2MNCF-10F, each with a DC12V coil on a DIN plug. Do the power budget before choosing a supply: 10 stations x 7.0 W = 70 W if every coil is held energised at once, roughly 5.8 A at 12 V - rate the 12 V rail for that worst case, not for one valve.
All ten stations share the same supply gallery and the same centralised exhaust port, so one air drop and one exhaust line serve the whole bank. Each body is a direct-acting, spring-return coaxial poppet with Cv 0.1 and a manual override for setup. The NC state is fixed at order time; the dedicated base gasket does not convert it.
Airtac 3V2M Solenoid Valve 3V2MNCF-10F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNCF-10F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally closed |
| Item form | Complete assembly — 10 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | DC12V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7.0 W |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNCF-10F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| DC12V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 10F | 10 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNCF-10F Is Used
Bottle-filling fill stations
Ten NC valves gating ten fill nozzles on a rotary bottle filler, each nozzle fed only while its coil is held on.
Jig clamping array
Spring-return swing clamps around a machining jig, all vented by one centralised exhaust line leaving the cell.
Sorter diverter pushers
Pusher diverters along a warehouse sorting line, each firing independently from one shared 12 V controlled supply.
Is the Airtac 3V2M Solenoid Valve 3V2MNCF-10F the Right Part?
Manifold density costs flow: every one of the ten stations is Cv 0.1, so give any high-flow function its own individual 3V2 (Cv 0.18 at 1/8, 0.19 at 1/4, vacuum-rated) or a 3V3 (Cv 0.62 at 1/4, also vacuum-rated). If the duty is small and power is tight, 3V1 runs on 3.0 W DC.
Lock down five points: state (NC here, not convertible after purchase), voltage (DC12V), entry (DIN plug), stations (10F) and exhaust (centralised), with PT as the standard thread and G or NPT listed as order options. A double-acting cylinder needs a 5-port valve - specify the AirTAC 4V series for that duty.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNCF-10F FAQ
Each station: 3/2 direct-acting, single solenoid, spring return, NC; Cv 0.1; 0-0.8 MPa (0-114 psi); -20 to 70 C; DC12V coil at 7.0 W (AC coils 7 VA); IP65 (DIN 40050); PT1/8 port; air filtered through a 40 um or finer element.
Allow 7.0 W per coil. With all ten coils energised together that is 70 W, about 5.8 A at 12 V, so size the supply for the fully energised worst case. Also note the centralised exhaust serves all ten stations, and the NC state cannot be changed after purchase.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNCF-10F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.