Airtac 3V2M Solenoid Valve 3V2MNOA-9F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNOA-9F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally open
- Port size1/8 in
- Coil voltageAC220V
- Electrical entryDIN plug (DIN socket type)
- Stations9
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNOA-9F
The 3V2MNOA-9F bundles nine 3/2 normally open solenoid valves, AC220V DIN plug coils and a 9-station base into one ordered assembly. Because the valves are normally open, compressed air flows from supply to outlet whenever a coil is de-energised; switching the coil on vents the outlet. Each valve is direct-acting, single solenoid with spring return, built as a coaxial shut-off poppet for tight seating, and rated Cv 0.1 with IP65 coil protection.
All nine stations share one air supply and one wiring run through the dedicated base, which shortens commissioning and makes faults easy to trace station by station. This version exhausts centrally, so every station vents through a common port. Note that the normally open state is fixed at the factory: the base gasket cannot be reversed or converted to change the state, so order NC or NO correctly up front.
Airtac 3V2M Solenoid Valve 3V2MNOA-9F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNOA-9F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally open |
| Item form | Complete assembly — 9 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC220V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNOA-9F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NO | Normally open: air passes until the coil is energised. |
| AC220V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 9F | 9 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNOA-9F Is Used
Rotary indexing drill head
On a multi-spindle drilling table, one 3V2M station per spindle feeds the spring-return clamp cylinder; being normally open, all clamps stay released whenever the 220 V control circuit is dead.
Can-end blow-off manifold
A nine-station NO assembly keeps a row of air-blow nozzles on a can line flowing while de-energised and vents them only when the coil is switched, a fail-open behaviour that suits drying stations.
Tray forming machine clamps
Carton and tray formers use one single-acting clamp per corner; a shared-supply 9-station base feeds them all from one air line and one wiring run instead of nine separate valves and hoses.
Is the Airtac 3V2M Solenoid Valve 3V2MNOA-9F the Right Part?
Size both ways before ordering. 3V2M trades flow for manifold density at Cv 0.1, so if one station must pass more air, fit an individual 3V2 (Cv 0.18 at 1/8 in, 0.19 at 1/4 in, vacuum-rated) or a 3V3 (Cv 0.62, 1/4 in, vacuum-rated) for the highest flow in the 3V range. Where the duty is light, the 3V1 body draws only 3.0 W on DC. A double-acting cylinder needs a 5-port AirTAC 4V valve, not this 3/2 family. Match five points: initial state (NO here, unchangeable after purchase), coil voltage (AC220V, 7 VA per coil), electrical entry (DIN plug), station count (9), exhaust routing (centralised; D gives independent) and thread (PT standard; G or NPT are order options).
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNOA-9F FAQ
Each valve has a Cv 0.1 flow coefficient, operating pressure 0-0.8 MPa (0-114 psi), media temperature -20 to 70 C, AC coil power 7 VA (about 63 VA if all nine are energised together) and IP65 (DIN 40050) coil protection. Air must be filtered to 40 um or finer; lubrication is not required.
The nine NO valves pass air to their outlets whenever coils are off and vent them when energised. AirTAC specifies a dedicated base gasket, and turning that gasket over does not convert NC to NO - the state is set by the valve internals at manufacture. Confirm NO is what your circuit needs before ordering. For double-acting cylinders, move to the AirTAC 4V series.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNOA-9F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.