Airtac 3V2M Solenoid Valve 3V2MNOC-17F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNOC-17F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally open
- Port size1/8 in
- Coil voltageAC110V
- Electrical entryDIN plug (DIN socket type)
- Stations17
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNOC-17F
The 3V2MNOC-17F is a complete 17-station manifold assembly: seventeen normally closed 3/2 valve bodies seated on one 3V2M base, each driven by an AC110V coil behind a DIN plug. Every body is a direct-acting, single-solenoid unit with spring return and a coaxial shut-off poppet, so a de-energised station blocks the supply and vents its outlet through the shared exhaust gallery.
One air inlet feeds all seventeen stations and one wiring run powers them, so a fault can be traced station by station instead of valve by valve. Each AC110V coil draws 7 VA, giving roughly 119 VA if every station is energised at once - size the feed for that worst case. Note that the NC state is built in at the factory: the dedicated base gasket cannot be flipped to turn these valves normally open, so order NO instead if any outlet must pass air while de-energised.
Airtac 3V2M Solenoid Valve 3V2MNOC-17F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNOC-17F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally open |
| Item form | Complete assembly — 17 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC110V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNOC-17F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NO | Normally open: air passes until the coil is energised. |
| AC110V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 17F | 17 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNOC-17F Is Used
Packaging machine clamp array
Seventeen single-acting clamp cylinders on a carton sealing machine, each holding a workpiece only while its station is energised, all fed from one PT1/8 supply line.
Bottle-rinse blow nozzles
On a beverage filling line, each station pulses a blow nozzle to dry bottles; the normally closed state means no air reaches any nozzle until that coil is switched.
Wiring-harness test rig
Seventeen test points on a loom, each clamped by a small spring-return cylinder and switched by one manifold station, wired back to the cabinet on a single AC110V run.
Is the Airtac 3V2M Solenoid Valve 3V2MNOC-17F the Right Part?
Size by duty before you commit. The shared base keeps every station at Cv 0.1, so if one of your seventeen circuits must move more air, hang an individual 3V2 valve on its own ports (Cv 0.18 at 1/8, Cv 0.19 at 1/4, vacuum-rated) or step to a 3V3 at Cv 0.62 and 1/4. Where the duty is light, the 3V1 body saves power at 3.0 W DC. A double-acting cylinder needs 5 ports, so send that job to the AirTAC 4V series. Order against five points - NC initial state, AC110V coil, DIN plug entry, 17 stations, centralised exhaust - with PT as the standard thread and G or NPT on request. NC and NO are fixed at purchase; the gasket cannot be flipped to convert them.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNOC-17F FAQ
Cv 0.1 per station, operating pressure 0-0.8 MPa (0-114 psi), temperature -20 to 70 C, coil power AC 7 VA (DC versions of this family draw 7.0 W), protection IP65 to DIN 40050, PT1/8 ports, medium is air filtered through a 40 um or finer element with no lubrication required.
No. 3V2M uses a dedicated base gasket, and reversing or flipping that gasket does not change the initial state - the catalogue states this explicitly. NC or NO must be chosen at order time, so if any of your seventeen circuits needs air while de-energised, order those stations as NO from the start.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNOC-17F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.