Airtac 3V2M Solenoid Valve 3V2MNOF-10F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNOF-10F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally open
- Port size1/8 in
- Coil voltageDC12V
- Electrical entryDIN plug (DIN socket type)
- Stations10
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNOF-10F
This 3V2MNOF-10F is a ready-matched set: ten normally open 3/2 valve bodies mounted on a 10-station 3V2M base, PT threaded, with one centralised exhaust serving all ten. Each valve passes air while de-energised and vents its circuit when its coil is energised.
One supply gallery feeds all ten stations and one harness carries the DC12V wiring (DIN plugs, 7.0 W per coil), so a dead station stands out immediately against its working neighbours. With every coil energised the bank pulls about 70 W - near 2.9 A at 12 V - so rate the supply for that worst case. Each body is IP65 to DIN 40050 with a manual override, and there is no field conversion of the NO state: the base gasket is not reversible.
Airtac 3V2M Solenoid Valve 3V2MNOF-10F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNOF-10F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally open |
| Item form | Complete assembly — 10 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | DC12V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7.0 W |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNOF-10F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NO | Normally open: air passes until the coil is energised. |
| DC12V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 10F | 10 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNOF-10F Is Used
PCB pallet clamping
Ten single-acting hold-downs on a PCB depaneling pallet each get their own station, while the shared DC12V loom means one wiring run instead of ten separate cables.
Packaging reject fingers
Reject pushers spaced along a pouch conveyor fire from ten manifold stations wired in parallel; the normally open coils let each finger be pulsed shut from one 12 V panel.
Plastics pallet ejectors
Ten part-eject pins on a plastics assembly pallet stroke in sequence off the shared supply, and the common exhaust keeps the cell piping to a single line.
Is the Airtac 3V2M Solenoid Valve 3V2MNOF-10F the Right Part?
Check the five matching points: NO state per valve, DC12V, DIN plug entry, PT thread, and the 10-station base with centralised exhaust (order the -D suffix instead if each station needs its own exhaust). NC/NO cannot be swapped after purchase - flipping the base gasket does not convert the valve.
Flow-wise the base costs capacity: Cv 0.1 per station against 0.18 on a standalone 3V2 at 1/8 in (0.19 at 1/4 in) and 0.62 on a 3V3 at 1/4 in; both of those are vacuum rated, which 3V2M itself is not. For low coil load the 3V1 at 3.0 W on DC is the lighter choice. Double-acting cylinders require the 5-port 4V series, not any 3V valve.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNOF-10F FAQ
Each station: Cv 0.1, 0-0.8 MPa (0-114 psi), -20 to 70 C, DC coil 7.0 W (AC versions 7 VA), IP65 per DIN 40050, PT1/8 port. Air must be filtered to 40 um or finer; no lubrication needed. Ten coils energised together draw about 70 W.
They are 3-port 2-position valves: each either feeds its outlet or vents it, which suits single-acting spring-return cylinders, on/off blow, clamping and pilot duty. A double-acting cylinder needs two outlet connections and therefore a 5-port valve such as the AirTAC 4V series, not a 3/2 valve.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNOF-10F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.