Airtac 6TV Solenoid Valve P-6TV100M-R2
The AirTAC Airtac 6TV Solenoid Valve P-6TV100M-R2 is a genuine blank plate kit for the 100M manifold. It seals an unused valve station so the base stays leak-tight, letting you buy a longer manifold now and fill the spare stations later.
- Part typeManifold blank plate kit
- Manifold100M
- Kit contentsOne blank plate and its screw
- Order codeR2
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 6TV Solenoid Valve P-6TV100M-R2
The P-6TV100M-R2 is a blank plate kit for the 6TV100M manifold base. Where no valve is fitted, the open station would vent the common 1/4 in supply straight to atmosphere; this plate closes that port so the bank stays leak-tight from end to end. The kit contains exactly one plate and its fixing screw, and one kit seals one station.
Blanking spares is the standard way to build a bank for growth: buy the longer base once, run the 6TV100 valves you need today, and seal the remaining positions. When a new function is added later, remove a plate, fit the valve in its place and refit the screw - no re-piping and no base swap. The plate changes nothing about how the fitted valves behave; it simply keeps an empty station from leaking.
Airtac 6TV Solenoid Valve P-6TV100M-R2 Technical Specifications
| Model | Airtac 6TV Solenoid Valve P-6TV100M-R2 |
|---|---|
| Part type | Manifold blank plate kit |
| Manifold series | 100M |
| Fits valve bodies | 4A100 air pilot and 4V100 / 5V100 solenoid |
| Kit contents | One blank plate and its screw |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Temperature | -20 to +70 °C |
| Replaces | The blank plate on any 100M station |
| Sold as | One kit per station |
This is a service part for the 100M manifold, not a valve. Check the manifold body size stamped on your base before ordering: a 100M blank plate does not fit a different body size.
Model Code: Airtac 6TV Solenoid Valve P-6TV100M-R2
| P | Kit / service part. |
|---|---|
| 6TV100M | For the 100M manifold of the 6TV valve line. |
| R2 | R2 = blank plate kit (plate + screw). |
How a Manifold Bank Goes Together
- check One PT1/4 inlet feeds every station, so you run a single supply drop.
- check Each station takes one 100-body valve; the A and B work ports stay on the valve.
- check Exhausts collect in the base — silence the bank once instead of per valve.
- check Any station you are not using yet takes a P-100M-R2 blank plate.
- check Station seals are a serviceable part: P-100M-R1.
Where the Airtac 6TV Solenoid Valve P-6TV100M-R2 Is Used
Spare stations on a packaging machine
A flow-wrapper panel built on a 16-station 6TV100M base often starts with ten valves and six empty positions. One plate kit per empty station keeps the 1/4 in common inlet tight until those future actuators are actually fitted.
Bottling line staged upgrades
When a filling line gains a capping or labelling head, the new 6TV100 valve drops onto a position the plate was sealing. Swapping plate for valve is a minutes-long job, with no new base and no new supply line to run.
Electro-pneumatic control cabinets
Cabinet builders leave blanked stations wherever future interlocks are expected, so tube runs to the 1/4 in inlet header stay unchanged as the valve count grows during machine revisions.
Is the Airtac 6TV Solenoid Valve P-6TV100M-R2 the Right Part?
Confirm the base before ordering: the manifold should be stamped 100M for the 6TV valve line, with its 1/4 in common inlet and M5 or 1/8 in station ports. Count the stations you want to close and order one kit per station - a fully blanked 16-position 6TV100M base takes 16 kits.
If you are still choosing the base itself, remember the 100-body footprint grows 19 mm per station (overall length A = 38 + 19 x (n-1) mm, mounting pitch KA = 28 + 19 x (n-1) mm). Spare stations cost panel length now but are far cheaper than swapping the whole base when the machine is extended.
Quick checklist
- ✓ Valve body size (100) matches the base
- ✓ One kit covers one station
- ✓ Body size stamped on your manifold
Airtac 6TV Solenoid Valve P-6TV100M-R2 FAQ
One kit seals one station, because the pack contains a single plate and its screw. Count the empty positions on your 6TV100M base and order that many: a base with 4 of its up-to-16 stations blanked needs 4 kits, and a fully blanked 16-station base needs 16.
Check the marking on the base: it must be a 6TV100M manifold for 100-body valves, with the 1/4 in common inlet and M5 or 1/8 in station ports. A 100M plate does not seal a 200M, 300M or 400M station, and no plate in this range fits a competitor's base.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard parts are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac 6TV Solenoid Valve P-6TV100M-R2
Send us the quantity, thread standard and destination. We confirm price, stock and lead time — usually within 7-8 hours.