Airtac 6TV Solenoid Valve P-6TV200M-R2
The AirTAC Airtac 6TV Solenoid Valve P-6TV200M-R2 is a genuine blank plate kit for the 200M manifold. It seals an unused valve station so the base stays leak-tight, letting you buy a longer manifold now and fill the spare stations later.
- Part typeManifold blank plate kit
- Manifold200M
- Kit contentsOne blank plate and its screw
- Order codeR2
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 6TV Solenoid Valve P-6TV200M-R2
The P-6TV200M-R2 is AirTAC's blank plate kit for the 6TV200M manifold, the 200-body base built for the 6TV valve line. When a station on that base is empty, the common inlet and the collected exhaust would otherwise vent straight out of the open port. This plate closes the station so the rest of the bank stays pressurised and leak-tight. The kit contains exactly two items: one blank plate and one fixing screw.
This part is not a valve and it does not change how any fitted valve behaves - it simply seals a station you are not using yet. One kit covers one station, so a base with three empty positions needs three kits. Blanking spares is also the planned way to grow: order the longer 6TV200M base now, cap what you do not need, and open those stations later without swapping the manifold.
Airtac 6TV Solenoid Valve P-6TV200M-R2 Technical Specifications
| Model | Airtac 6TV Solenoid Valve P-6TV200M-R2 |
|---|---|
| Part type | Manifold blank plate kit |
| Manifold series | 200M |
| Fits valve bodies | 4A200 air pilot and 4V200 / 5V200 solenoid |
| Kit contents | One blank plate and its screw |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Temperature | -20 to +70 °C |
| Replaces | The blank plate on any 200M station |
| Sold as | One kit per station |
This is a service part for the 200M manifold, not a valve. Check the manifold body size stamped on your base before ordering: a 200M blank plate does not fit a different body size.
Model Code: Airtac 6TV Solenoid Valve P-6TV200M-R2
| P | Kit / service part. |
|---|---|
| 6TV200M | For the 200M manifold of the 6TV valve line. |
| R2 | R2 = blank plate kit (plate + screw). |
How a Manifold Bank Goes Together
- check One PT1/4 inlet feeds every station, so you run a single supply drop.
- check Each station takes one 200-body valve; the A and B work ports stay on the valve.
- check Exhausts collect in the base — silence the bank once instead of per valve.
- check Any station you are not using yet takes a P-200M-R2 blank plate.
- check Station seals are a serviceable part: P-200M-R1.
Where the Airtac 6TV Solenoid Valve P-6TV200M-R2 Is Used
Phased packaging line build-out
A bottling plant installs a 6TV200M bank sized for a future second filler head. The not-yet-valved stations are capped with these plates until the expansion day arrives.
Transfer machine rework
After re-jigging a machining line, some valve positions move or disappear. Fitting a plate to each vacated station keeps the common supply sealed with no re-plumbing of the inlet.
Instrumentation control panel
A panel builder wires cylinder banks on a single 6TV200M base and leaves two spare positions so customers can add functions in the field, each spare closed with its own kit.
Is the Airtac 6TV Solenoid Valve P-6TV200M-R2 the Right Part?
Confirm the fit from the base itself: the manifold should be stamped 6TV200M, meaning the 200-body base for the 6TV valve line. The R2 suffix on this part number is the marker for a blank plate - if your manifold is weeping between a valve and the base rather than leaking from an open station, you need the R1 gasket kit instead. Count the empty stations on your base and order one kit per station.
A practical buying tip: if you are specifying a new bank and expect to add valves within a year or two, price the longer base plus a few of these plates against replacing the manifold later. The plate-and-screw route usually wins on both cost and downtime, because adding a valve then becomes a two-minute swap instead of a base change.
Quick checklist
- ✓ Valve body size (200) matches the base
- ✓ One kit covers one station
- ✓ Body size stamped on your manifold
Airtac 6TV Solenoid Valve P-6TV200M-R2 FAQ
One kit seals exactly one empty station, so count the open positions on your 6TV200M base and order that many. Each kit contains one blank plate and one screw - nothing else. If instead a fitted valve is leaking where it sits on the base, that is a worn station seal and the R1 gasket kit is the correct part, also one per station.
Check the body size stamped on the manifold. It must read 6TV200M - the 200-body base for the 6TV valve line. The 6TV prefix in the part number matters: keep it when ordering, because it identifies the valve line the base was built for. The R2 suffix is what makes this a blanking plate rather than the R1 seal set.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard parts are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac 6TV Solenoid Valve P-6TV200M-R2
Send us the quantity, thread standard and destination. We confirm price, stock and lead time — usually within 7-8 hours.