Airtac 6TV Solenoid Valve P-6TV300M-R2
The AirTAC Airtac 6TV Solenoid Valve P-6TV300M-R2 is a genuine blank plate kit for the 300M manifold. It seals an unused valve station so the base stays leak-tight, letting you buy a longer manifold now and fill the spare stations later.
- Part typeManifold blank plate kit
- Manifold300M
- Kit contentsOne blank plate and its screw
- Order codeR2
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 6TV Solenoid Valve P-6TV300M-R2
The P-6TV300M-R2 is AirTAC's blank plate kit for the 6TV300M valve manifold base. Where a station is not yet carrying a 6TV-series valve, the plate bolts over the empty port and seals it, so the common 3/8" inlet stays leak-tight and the valves already mounted on the base keep working untouched.
Each kit contains one blank plate and its screw - nothing else. One plate covers one station, so a base with three spare positions needs three kits. The plate changes nothing about how the fitted valves function; it simply closes a port until a valve goes in.
Airtac 6TV Solenoid Valve P-6TV300M-R2 Technical Specifications
| Model | Airtac 6TV Solenoid Valve P-6TV300M-R2 |
|---|---|
| Part type | Manifold blank plate kit |
| Manifold series | 300M |
| Fits valve bodies | 4A300 air pilot and 4V300 / 5V300 solenoid |
| Kit contents | One blank plate and its screw |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Temperature | -20 to +70 °C |
| Replaces | The blank plate on any 300M station |
| Sold as | One kit per station |
This is a service part for the 300M manifold, not a valve. Check the manifold body size stamped on your base before ordering: a 300M blank plate does not fit a different body size.
Model Code: Airtac 6TV Solenoid Valve P-6TV300M-R2
| P | Kit / service part. |
|---|---|
| 6TV300M | For the 300M manifold of the 6TV valve line. |
| R2 | R2 = blank plate kit (plate + screw). |
How a Manifold Bank Goes Together
- check One PT3/8 inlet feeds every station, so you run a single supply drop.
- check Each station takes one 300-body valve; the A and B work ports stay on the valve.
- check Exhausts collect in the base — silence the bank once instead of per valve.
- check Any station you are not using yet takes a P-300M-R2 blank plate.
- check Station seals are a serviceable part: P-300M-R1.
Where the Airtac 6TV Solenoid Valve P-6TV300M-R2 Is Used
Phased panel build
A control panel is wired for eight 6TV valves but only five are fitted today; blanking the three empty 300M stations keeps the shared 3/8" supply tight until the next valve arrives.
Bottling line expansion
A filling machine's gripper circuits will grow next year. Leave two spare stations on the 6TV300M bank, sealed with plates now, and add valves later without replacing the base.
Faulty valve workaround
When one valve on a packaging machine's bank fails and no spare is on the shelf, remove it, blank that station with a plate, and the rest of the bank keeps the line running.
Is the Airtac 6TV Solenoid Valve P-6TV300M-R2 the Right Part?
Check the base before ordering: it should read 6TV300M, the manifold for 300-body valves with a 3/8" common inlet and up to 12 stations. Count the empty stations and order one kit per position. If you are buying a 300M base with spare stations for future expansion, order the plates at the same time so the unused ports are sealed from day one.
Quick checklist
- ✓ Valve body size (300) matches the base
- ✓ One kit covers one station
- ✓ Body size stamped on your manifold
Airtac 6TV Solenoid Valve P-6TV300M-R2 FAQ
One kit seals one station. Count the positions on your 6TV300M base that carry no valve and order one plate per position. A base bought with three spare stations needs three kits. If you later fill a blanked port with a valve, the plate and its screw come off and the station seal for that valve is already in the base.
The P-6TV300M-R2 seals a single empty station on the 6TV300M base - the manifold for 300-body valves, with a 3/8" common inlet, station ports of 1/4" or 3/8", up to 12 stations, and mounting for 4A300 air pilot and 4V300/5V300 solenoid valves. A 100M, 200M or 400M base needs its own kit, so check the size stamped on your manifold before ordering.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard parts are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac 6TV Solenoid Valve P-6TV300M-R2
Send us the quantity, thread standard and destination. We confirm price, stock and lead time — usually within 7-8 hours.