Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-10SB
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-10SB is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-10SB
The ACEJ32X100-10SB is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 100 mm stroke by up to 10 mm on site, giving a usable range of 90-100 mm without changing hardware. At 0.5 MPa the 32 mm bore delivers 402.1 N push and 345.6 N pull, rising to 563 N push at 0.7 MPa. The male rod thread (B code) suits couplings that thread onto the rod, and the fitted -S magnet lets CMSE or DMSE switches report end positions.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight guarding and slide assemblies where a full-length body will not fit. In practice, plan for roughly 241 N (about 24 kgf) of real work at 0.5 MPa, or lift about 20 kg vertically with a 2:1 margin. A hard-anodized aluminium body, S45C hard-chrome rod, fixed TPU bumpers at both ends and FA/LB mounting options round out a serviceable package running 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-10SB Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-10SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-10SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-10SB Is Used
Fixture clamping on CNC pallets
402.1 N push at 0.5 MPa clamps aluminium housings in machining fixtures, and the 10 mm window lets one cylinder serve pallets of slightly different heights.
Packaging line divert stops
The 90-100 mm extend range stops cartons at a check station, with the fitted magnet and a CMSE switch confirming the stop is fully out.
Small press ejection
About 20 kg vertical lift capacity with a 2:1 margin ejects finished parts from shallow die cavities in electronics assembly.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-10SB the Right Cylinder?
Size both ways before committing: the 25 mm bore gives 245.4 N push at 0.5 MPa if your load is lighter, while the 40 mm bore reaches 628.3 N push for heavier clamping. Keep the stop screw as a stroke trim only - it is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air is lost. If you need position feedback, this model already carries the optional -S magnet for CMSE / DMSE switches; bolt it to FA flange or LB foot mounts to match your fixture.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-10SB FAQ
Push is 402.1 N and pull 345.6 N at 0.5 MPa; at 0.7 MPa push rises to 563 N and pull to 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 100 mm extend stroke by up to 10 mm, so the working range is 90-100 mm. It is a double acting cylinder with a fixed TPU bumper at each end, running 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, fitting shallow slides and guarded stations. The body is hard-anodized aluminium with an S45C hard-chrome rod, and FA flange or LB foot mounts bolt to the standard face. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches can be clipped into the body slots to signal end positions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.