Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-40SB
The AirTAC Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-40SB is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø80mm bore and 40mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ80 mm
- Full stroke40 mm
- Port sizePT3/8
- Adjuster threadM20×1.5
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-40SB
The AirTAC ACQJ80X40-40SB is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. The full stroke is 40mm with a 40mm adjustment window, yielding a usable extend range of 0-40mm. The retract stroke remains completely unaffected by this mechanism.
Because the piston area is unchanged, the output force is identical to a standard ACQ of the same 80mm bore. This model includes a male M22x1.5 piston rod thread for direct load coupling, a PT3/8 port, and a built-in magnet (-S) for position sensing. It relies on a fixed NBR elastomer bumper at each end for deceleration.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-40SB Technical Specifications
| Model | Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-40SB |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Full stroke | 40 mm |
| Adjuster thread | M20×1.5 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M16×2.0 (F) / M22×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-40SB
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×40 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-40SB Is Used
Machining Fixture Stops
Dial in the exact clamping reach on a CNC fixture during part changeovers without machining new spacer blocks.
Carton Sealing Formers
Adjust the folding stroke depth on the fly to accommodate varying box heights on a packaging line.
Press Tonnage Setup
Set precise trial end positions on a light-duty press to prevent over-travel during prototype forming.
Is the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-40SB the Right Cylinder?
If you need slightly less force, the 63mm bore provides 1558.6N push at 0.5MPa, while the larger 100mm bore yields 3927.0N. Since the full stroke here is 40mm and the window is 40mm, a fixed-stroke ACQ80X40 is sufficient if you never require on-the-fly end-position tuning. To order, confirm the 80mm bore, 40mm full stroke, 40mm window, the -S magnet for switches, and the -B male rod thread.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-40SB FAQ
The usable extend range is 0-40mm (40mm full stroke minus the 40mm window). Force is identical to a standard ACQ: 2513.2N push and 2267.8N pull at 0.5MPa, 3518.5N push at 0.7MPa, and a maximum push of 513kgf at 1.0MPa. The external adjuster thread is M20x1.5.
An external threaded stop with a lock nut limits the extend stroke only, meaning the force remains unchanged. The retract stroke is unaffected. Deceleration is handled by a fixed elastomer bumper, not an adjustable air cushion. The built-in -S magnet works with both reed and electronic solid-state switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-40SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.