Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ40X30S
The AirTAC Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ40X30S is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 30mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
- BoreØ40 mm
- Stroke30 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM8×1.25 (F) / M14×1.5 (B)
- ConfigurationStandard compact
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ40X30S
The AirTAC B01-ACQ40X30S is a double-acting JIS compact cylinder engineered for space-constrained machinery. The leading B01- prefix designates this as an application-dedicated (customer-specified) variant, meaning it is mechanically identical to the standard ACQ40X30S. It utilizes a short C-clip and riveted body design to minimize axial footprint, yielding a robust 628.3 N push force at 0.5 MPa.
This 40 mm bore unit features a 16 mm piston rod and a PT1/8 port. Because it carries the S option, a built-in piston magnet allows position detection using AirTAC reed or electronic switches fitted into the body grooves. End-of-stroke energy is managed by fixed NBR elastomer bumpers rather than adjustable air cushions, ensuring reliable deceleration within the 30-500 mm/s speed range.
Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ40X30S Technical Specifications
| Model | Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ40X30S |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ40X30S
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Where the Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ40X30S Is Used
PCB Edge Guiding
Provides precise lateral pushing force on a conveyor line to align printed circuit boards before optical inspection, utilizing the 30 mm stroke to nudge panels into exact position.
Carton Flap Folding
Drives a short mechanical arm to tuck minor flaps on corrugated cartons prior to tape sealing, where the 628.3 N extension force easily overcomes cardboard resistance.
Module Ejection
Ejects tested electronic modules from a test socket with a compact 40 mm bore body that fits neatly within dense semiconductor handling fixtures.
Is the Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ40X30S the Right Cylinder?
When sizing this model, consider stepping down to the 32 mm bore (402.1 N push at 0.5 MPa) for lighter loads, or up to the 50 mm bore (981.8 N push at 0.5 MPa) if your application requires greater thrust. To order, confirm the 40 mm bore, 30 mm stroke, PT1/8 port, female M8x1.25 rod thread, and the required S magnet option.
Note that a standard compact cylinder like this does not hold its position if air pressure is lost or the directional valve is centered; the rod will drift. If your application demands fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ40X30S FAQ
This double-acting cylinder provides a push force of 628.3 N and a pull force of 527.8 N at 0.5 MPa. At 0.7 MPa, the push force is 879.6 N, with a maximum push capacity of 128 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
The B01- prefix simply indicates an application-dedicated (customer-specified) build that is mechanically identical to the ACQ40X30S. It does not feature adjustable air cushions; instead, it uses fixed NBR elastomer bumpers at both ends to absorb end-stop impact. For high kinetic energy loads, an external shock absorber should be added.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ40X30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.