Airtac B01-SDAJ Special Cylinder B01-SDAJ20X60-30S
The AirTAC Airtac B01-SDAJ Special Cylinder B01-SDAJ20X60-30S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
- BoreØ20 mm
- Max stroke60 mm
- Adjustable range30–60 mm
- Adjuster threadM6×1.0
- Port sizeM5×0.8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-SDAJ Special Cylinder B01-SDAJ20X60-30S
The B01-SDAJ20X60-30S is a double-acting, single-rod compact cylinder. The leading "B01-" prefix marks this as an AirTAC application-dedicated (customer-specified) variant of the base SDAJ20X60-30S; mechanically, every spec matches the standard unit exactly. It features a short riveted body that saves axial mounting depth where round-body or profile cylinders will not fit.
An external M6x1.0 adjuster screw lets you dial the extend stop on-site between 30 and 60 mm without shims. The adjuster sets the mechanical stop position, not the piston area, so output remains 157.1 N push at 0.5 MPa. A fixed NBR bumper decelerates the stroke end, and the built-in magnet (-S) supports reed or electronic switches.
Airtac B01-SDAJ Special Cylinder B01-SDAJ20X60-30S Technical Specifications
| Model | Airtac B01-SDAJ Special Cylinder B01-SDAJ20X60-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac B01-SDAJ Special Cylinder B01-SDAJ20X60-30S
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac B01-SDAJ Special Cylinder B01-SDAJ20X60-30S Is Used
Trial Positioning Jigs
Dial the extend stop from 30 to 60 mm to find the exact contact point for a 94 N safe working load during prototype jig setup.
Changeover Tooling
Switch product profiles on a packaging line by turning the M6x1.0 screw, avoiding part changes while maintaining 157.1 N push at 0.5 MPa.
Compact Ejectors
Fit the short riveted body into tight machine bays to eject parts, using the fixed NBR bumper to absorb end-of-stroke shock.
Is the Airtac B01-SDAJ Special Cylinder B01-SDAJ20X60-30S the Right Cylinder?
Size this 20 mm bore against its neighbors: dropping to a 16 mm bore yields 100.5 N push at 0.5 MPa, while stepping up to a 25 mm bore provides 245.4 N push at 0.5 MPa. This unit delivers 157.1 N push at 0.5 MPa, translating to a safe working load of roughly 94 N (about 60 percent of capacity) and a vertical lift of approximately 8 kg with a 2:1 margin.
Choose this model for setups requiring frequent on-machine stroke tuning across a 30-60 mm window. Confirm the 20 mm bore, 60 mm max stroke, 30 mm adjustment, M5x0.8 port, female M4x0.7 rod thread, and the -S magnet. A plain cylinder does not hold a load on air loss or valve centering; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 30–60 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M6×1.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-SDAJ Special Cylinder B01-SDAJ20X60-30S FAQ
The B01- prefix indicates an application-dedicated variant of the SDAJ20X60-30S with identical mechanics. It delivers 157.1 N push and 131.9 N pull at 0.5 MPa, 219.9 N push and 184.7 N pull at 0.7 MPa, with a theoretical max of 32 kgf at 1.0 MPa. It uses an M5x0.8 port, an Ø8 mm rod, and operates at 30-500 mm/s.
Turning the external R (M6x1.0) screw shortens the extend stop by up to 30 mm, giving a usable extend range of 30-60 mm; retract remains full. The screw sets the stop position only and does not alter force. The -S code means a built-in piston magnet is included for position sensing with AirTAC reed or electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac B01-SDAJ Special Cylinder B01-SDAJ20X60-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.