Airtac B06-TCL Battery Dedicated Air Cylinder B06-TCL25X20S
The AirTAC Airtac B06-TCL Battery Dedicated Air Cylinder B06-TCL25X20S is a genuine JIS-standard guided cylinder with a Ø25mm bore and 20mm stroke on twin guide rods. Its integrated steel-ball linear bearing gives low-friction, high-precision travel — well suited to vertical lifts and high-load, high-accuracy moves, holding the tool square to ±0.06° of rotation without any external linear guide.
- BoreØ25 mm
- Stroke20 mm
- Port size1/8"
- BearingSteel-ball linear bearing
- Non-rotating±0.06°
- CushionRubber bumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-TCL Battery Dedicated Air Cylinder B06-TCL25X20S
The AirTAC B06-TCL25X20S is a JIS guided twin-rod double-acting cylinder built for battery-manufacturing lines. The B06- prefix marks this as a battery-dedicated variant of the TCL25X20S, retaining the exact same mechanical specs. It uses a steel-ball linear bearing for low-friction, high-precision travel, generating 245 N of push at 0.5 MPa.
The integrated twin guide rods eliminate the need for an external linear slide, saving space on cell stacking or module handling stations. A non-rotating tolerance of ±0.06° keeps grippers square under off-centre loads. The Ø12 mm piston rod uses 1/8" ports, and stroke ends are damped by fixed TPU bumpers rather than an adjustable cushion.
Airtac B06-TCL Battery Dedicated Air Cylinder B06-TCL25X20S Technical Specifications
| Model | Airtac B06-TCL Battery Dedicated Air Cylinder B06-TCL25X20S |
|---|---|
| Series | TCL JIS guided (twin-rod) cylinder |
| Bore size | Ø25 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Bearing | Steel-ball linear bearing |
| Port size | 1/8" |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Non-rotating tolerance | ±0.06° (retracted) |
| Cushion | Rubber bumper |
| Max std stroke | Up to 250 mm |
Specifications follow the official AirTAC TCL/TCM series datasheet (JIS standard). Confirm against the product label before installation. Thread options: PT (blank) / G / NPT. Every TC model ships with a built-in magnet for sensor switches.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 189 N |
| 0.7 MPa | 344 N | — |
| Max | 50 kgf | |
Force is set by the bore and piston rod (Ø12 mm); the twin guide rods carry side load and torque, not thrust. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac B06-TCL Battery Dedicated Air Cylinder B06-TCL25X20S
| TC | Tri-rod (guided, twin-rod) cylinder, double acting. |
|---|---|
| L | Bearing: Steel-ball linear bearing (L = linear ball). |
| 25 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet (standard on TC) for a magnetic sensor switch. |
Sister type: TCM25X20 (brass sliding bearing, more impact/dust tolerant). Thread codes: blank = PT · G · T = NPT.
Where the Airtac B06-TCL Battery Dedicated Air Cylinder B06-TCL25X20S Is Used
Battery Cell Stacking
Lifts and aligns battery cells with 245 N of thrust at 0.5 MPa. The steel-ball linear bearing ensures smooth, stick-slip-free vertical travel for delicate separator stacking.
Module Tab Welding
Positions module tabs for laser welding. The ±0.06° non-rotating tolerance keeps the welding fixture perfectly square under off-centre loads without needing an external guide.
Pack Assembly Stopper
Acts as a gating stop for battery packs on a conveyor. The twin guide rods absorb the side load of incoming packs, while the fixed TPU bumpers soften the stopping impact.
Is the Airtac B06-TCL Battery Dedicated Air Cylinder B06-TCL25X20S the Right Cylinder?
This 25 mm bore delivers 245 N push and 189 N pull at 0.5 MPa (344 N push at 0.7 MPa, 50 kgf max). If you need less force, the Ø20 bore provides roughly 157 N of push; for heavier tabbing or pressing, the Ø32 bore gives ~402 N. Choose the sibling TCM series with its brass sliding bearing if the cell line involves heavy impacts or dusty radial loads.
For battery line replacements, match the 25 mm bore, 20 mm stroke, 1/8" PT ports, and the standard S magnet. Note that the guide prevents rotation but will not stop the rod from drifting down on air loss; add an external rod lock for fail-safe vertical holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Side load / torque the guide must carry
- ✓ TCL (precision, low friction) vs TCM (impact, radial load)
- ✓ Stroke & mounting face (top / bottom / rear)
- ✓ Port/thread type (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check The guide unit takes side load & torque — but do not exceed the max safe load/torque for your stroke.
- check Mount from the top, bottom (screw or T-slot) or rear face; use the precision locating holes.
- check Do not disassemble the fixing block or guide unit — factory-set precision.
- check Fit CS1 / DS1 magnetic switches in the four sensor slots as needed.
Airtac B06-TCL Battery Dedicated Air Cylinder B06-TCL25X20S FAQ
This cylinder generates 245 N of push and 189 N of pull at 0.5 MPa. At 0.7 MPa, the push force is 344 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
The B06- prefix indicates this is AirTAC's battery-manufacturing dedicated variant of the TCL25X20S, mechanically identical to the base model. It uses fixed rubber TPU bumpers at each end to soften strokes; there is no adjustable air cushion screw to set.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TCL Cylinders
Request a Quote for Airtac B06-TCL Battery Dedicated Air Cylinder B06-TCL25X20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.