Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20006MC1WK
The AirTAC Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20006MC1WK is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT1/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20006MC1WK
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one air-preparation set for compressed air. This GC20006MC1WK is the size 200 frame with 1/8 inch NPT ports, a manual-drain filter bowl, a fine 5 um filter element, a round external pressure gauge scaled in MPa, and a reverse (check) valve fitted. The regulator sets downstream pressure anywhere from 0.05 to 0.9 MPa (7-130 psi), and the lubricator feeds an oil mist downstream.
This is a genuine AirTAC part. The GC family is offered in sizes 200, 300, 400 and 600 with a choice of PT, G (BSPP) or NPT threads, differential-pressure, automatic or manual drains, 40 um standard or 5 um fine filtration, square or round gauges in MPa, psi or bar scales, and the K check-valve option shown here. Flow figures are published as curves rather than a single rating, so we confirm datasheet and sizing figures on request.
Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20006MC1WK Technical Specifications
| Model | Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20006MC1WK |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20006MC1WK
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Where the Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20006MC1WK Is Used
Machine air drop with back-flow protection
Serves a single machine's valve-and-cylinder circuit from a plant air drop, where the fitted reverse valve helps guard the set against back-flow and the 1/8 inch NPT ports suit compact drop piping.
Laboratory test-rig air supply
Prepares air for bench-top test rigs and pneumatic measuring stations, with the 5 um element protecting sensitive instrumentation and the MPa round gauge giving a clear external pressure readout.
Pneumatic valve actuation lines
Supplies regulated and lubricated air to small actuated valves on a process skid, with the check-valve option in place and the manual-drain bowl emptied during routine skid maintenance rounds.
Is the Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20006MC1WK the Right Station?
This is the same 200-size, 1/8 inch NPT combination as the plain C1W version, with the K option adding a reverse (check) valve. Choose it when you want back-flow protection built into the set. The 5 um (W) element is the fine filtration grade; the standard grade is 40 um. Manual drain pairs with the wider 0.05-0.9 MPa (7-130 psi) regulation window, and the C1 code specifies a round external gauge in MPa.
Flow for this series is published as curves, not a single rated number, so send us your application details and we will confirm sizing and datasheet figures before you order. PT (standard) and G (BSPP) threads are catalogue alternatives to the NPT option fitted here.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20006MC1WK FAQ
No single rated flow number exists for this unit: AirTAC publishes GC-series flow as performance curves. Share your application conditions and we will confirm the matching curve and full datasheet figures on request before you order.
The K selects a reverse (check) valve fitted to the combination, which the otherwise identical GC20006MC1W does not carry. Everything else decodes the same way: size 200, 1/8 inch NPT ports, manual drain, 5 um element, standard regulator and a round MPa gauge.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20006MC1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.