Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20008MC3W
The AirTAC Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20008MC3W is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20008MC3W
The AirTAC GC series is a three-unit air preparation combination: a separate filter, pressure regulator and lubricator that together clean, regulate and oil-mist lubricate compressed air. This GC20008MC3W is the 200 size with PT1/4 ports, fitted with the finer 5 um W-grade filter element, a manual drain on the filter bowl, an external round pressure gauge scaled in bar, and the standard regulator type with a 0.05-0.9 MPa (7-130 psi) setting range.
It is a genuine AirTAC part rated for compressed air at up to 1.0 MPa (145 psi) working pressure between -5 and 70 C (non-freezing). The GC range steps through 200, 300, 400 and 600 sizes with ports from 1/8 to 1 inch, and drain, filter grade, gauge and thread options to suit the installation. Because flow is published as curves rather than a single rated figure, we confirm the datasheet and sizing on request.
Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20008MC3W Technical Specifications
| Model | Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20008MC3W |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20008MC3W
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Where the Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20008MC3W Is Used
CNC machining-center air supply
Feeding filtered, regulated and lubricated air to the tool-clamp and pallet-change circuits on a CNC machining center, where the 5 um element protects fine control valves and the manual drain is opened at shift checks.
Laboratory automation air
Supplying pneumatic actuators on laboratory automation such as pipetting and plate-handling stations, with the 5 um grade specified and a bar-scaled round gauge for a clear setpoint readout.
Process valve actuation skid
Conditioning the air feed for quarter-turn pneumatic actuators on a process valve skid; the regulator holds the actuator supply at the set pressure and the lubricator conditions the cylinders.
Is the Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20008MC3W the Right Station?
Choose the size step first: the 200 body with 1/4 inch PT ports suits lighter branch lines, while 300, 400 and 600 sizes carry progressively more flow on larger ports - match the step to air demand rather than to port size alone. This version combines the manual drain (simple and low-cost, but it needs periodic attention where condensate is heavy; automatic and differential-pressure drains are the alternatives), the 5 um W-grade element for finer filtration, and an external round gauge scaled in bar - MPa (1) and psi (2) scales are the other catalogue choices. Threads are PT as standard, with G (BSPP) and NPT available as options, and a mounting bracket can be added. Flow is published as curves, not one rated number, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20008MC3W FAQ
Flow for the GC series is published as pressure-drop curves, not as a single rated figure, so there is no one number we can quote. Send us your line pressure and air demand and we will confirm the correct size and the datasheet figures on request before you order.
The M in this code selects a manual drain, which you open periodically to remove collected condensate. The default differential-pressure drain works across the filter, and the A option gives fully automatic draining. Pick manual where bowl checks are already part of the routine.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC20008MC3W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.