Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC200C06C1WK
The AirTAC Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC200C06C1WK is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC200C06C1WK
GC200C06C1WK is a genuine AirTAC G-series three-piece F.R.L. combination: a separate filter, regulator and lubricator forming one air-treatment station. It removes water and particulate, holds downstream pressure steady and meters oil mist downstream. This 200-size set is specified with PT1/8 ports, a differential-pressure drain, a fine 5 um filter element, a round pressure gauge marked in MPa and a reverse (check) valve fitted, so downstream air does not bleed back through the set when upstream pressure drops.
The G-series runs from 200 through 600 sizes with ports from 1/8 to 1 inch and PT, G or NPT threads, so larger catalogue steps are available as the circuit grows. Maximum working pressure is 1.0 MPa (145 psi), the standard temperature range is -5 to 70 C (non-freezing), and the PC bowls suit indoor installation. Flow is published as curves rather than a single rating, so send us your application and we will confirm the figures and the full datasheet on request.
Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC200C06C1WK Technical Specifications
| Model | Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC200C06C1WK |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC200C06C1WK
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Where the Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC200C06C1WK Is Used
Truck service bay tools
Feeding impact guns and tire chucks in a truck service bay, with the reverse valve keeping downstream air from bleeding back if upstream pressure dips during heavy use.
Assembly press air circuit
Conditioning the air supply to a light-duty pneumatic assembly press, protecting the directional valve with 5 um filtration and metering oil mist to cylinder internals.
Saw jig pneumatic hold-downs
Supplying filtered, regulated and lubricated air to pneumatic hold-down clamps on a panel-saw jig, where a drop in upstream pressure should not drain the clamping circuit.
Is the Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC200C06C1WK the Right Station?
Start from the port: this 200-size set carries PT1/8, and GC300, GC400 and GC600 are the catalogue steps up when the branch needs more air. The differential-pressure drain is the default here; automatic (A) and manual (M) versions are catalogue options. The 5 um element suits finer duties such as pilot valves and instrumentation; the standard grade is 40 um. The reverse valve (K) is the decodable extra on this code compared with the same set without it. With the differential drain, the regulator set point ranges 0.15-0.9 MPa (20-130 psi), and the round gauge reads in MPa, with psi and bar scale options in the catalogue. PT is the standard thread, with G (BSPP) and NPT orderable as specifications. Flow is published as curves, not a single rating, so ask us to confirm sizing against the datasheet before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC200C06C1WK FAQ
Yes. AirTAC publishes G-series flow as curves rather than a single rated figure, so we do not state one number here. Give us your line pressure and the consumption of the tools or cylinders involved, and we will confirm the sizing from the datasheet on request.
Yes. PT is the standard thread on this code; the catalogue offers G (BSPP) with the G suffix and NPT with the T suffix. These are ordering specifications, so simply tell us which thread your piping uses when you enquire.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GC Copper-Free Air Source Treatment Component B52-GC200C06C1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.