Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20006C1
The AirTAC Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20006C1 is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/8" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
- TypePressure regulator
- Port sizePT1/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Pressure typeStandard type
- Pressure gaugeFitted
- Reflux valveNot fitted
- ThreadPT
- BracketFixing bracket included
About the Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20006C1
The AirTAC GR20006C1 is a G-series air pressure regulator: it reduces and holds downstream pressure and contains no filter and no bowl. This size 200 unit takes PT 1/8 in ports (PT is the standard thread; G and NPT are catalogue options) and carries an external round pressure gauge on the MPa scale. The adjustment range is 0.05-0.9 MPa (7-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), and the GR series is rated -20 to 70 C, a wider window than the rest of the G family.
This is a genuine AirTAC part. The G-series regulator range runs from size 200 to size 600 with larger ports and more flow at each step; options include a low-pressure type (L, adjustment up to 0.4 MPa), a reverse/check valve (K), an embedded square gauge or external round gauge in MPa, psi or bar scales, panel mounting, and a no-bracket build (J). AirTAC publishes regulator flow only as curves, so we will confirm datasheet figures on request.
Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20006C1 Technical Specifications
| Model | Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20006C1 |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (PT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Fixing bracket included |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20006C1
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| (blank) | Fixing bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
Size Class
- GR200PT1/8" - PT1/4"
- GR300PT1/4" - PT1/2"
- GR400PT3/8" - PT1/2"
- GR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Where the Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20006C1 Is Used
Paint booth spray-gun supply
Set on the drop feeding spray guns in a paint booth, it holds a steady gun inlet pressure so operators get a consistent fan pattern across a full shift.
Process valve actuation skid
Placed ahead of quarter-turn pneumatic actuators on a process valve skid, it sets the actuator supply pressure the solenoid valves and positioners were specified for.
Maintenance bench tool outlet
Used at a plant maintenance bench to step header pressure down to what impact wrenches and air ratchets are rated for, protecting the tools from full line pressure.
Is the Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20006C1 the Right Regulator?
Match the size and port to the air demand of the circuit: size 200 with 1/8 in ports suits compact tools and branch lines; step to 300, 400 or 600 as demand grows. Set the outlet anywhere in the 0.05-0.9 MPa (7-130 psi) adjustment range, or specify the L low-pressure type when you only need adjustment up to 0.4 MPa. Choose the gauge scale: this build carries the external round gauge on MPa, while psi (2) and bar (3) scales are orderable. The GR is panel-mountable and a bracket is included unless you order code J; K adds a reverse/check valve. Because flow is published as curves rather than a single rating, ask us to confirm the regulator against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Standard 0.9 MPa or low-pressure 0.4 MPa
- ✓ Gauge fitted, or order N without
- ✓ Gauge shape C round / F square
- ✓ Scale MPa (1), psi (2) or bar (3)
- ✓ Reflux valve needed, order K
Installation & Maintenance Notes
- check Install downstream of the filter, following the airflow arrow.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure while air is flowing, then lock the knob.
- check Adjust within 0.05 - 0.9 MPa (7 - 130 psi) only.
- check Operating range -20 to +70 °C.
- check Panel-mount or use the fixing bracket; do not hang it on tubing.
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20006C1 FAQ
AirTAC publishes regulator flow as characteristic curves, not a single rated figure, so there is no one number to quote. Send us your upstream pressure, set-point and required flow and we will confirm the sizing from the datasheet on request before you order.
C is the external round pressure gauge and 1 is the MPa scale; psi (2) and bar (3) scales can be ordered instead. Code N deletes the gauge, and the standard GR build carries an embedded square gauge.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20006C1
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.