Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL12X30S
The AirTAC Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL12X30S is a genuine JIS-standard guided cylinder with a Ø12mm bore and 30mm stroke on twin guide rods. Its integrated steel-ball linear bearing gives low-friction, high-precision travel — well suited to vertical lifts and high-load, high-accuracy moves, holding the tool square to ±0.08° of rotation without any external linear guide.
- BoreØ12 mm
- Stroke30 mm
- Port sizeM5×0.8
- BearingSteel-ball linear bearing
- Non-rotating±0.08°
- CushionRubber bumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL12X30S
The B52-TCL12X30S is AirTAC's copper-free (copper-prohibited) version of the TCL12X30S, a JIS-standard guided twin-rod cylinder. Its drive piston runs between two guide rods housed in a steel-ball linear bearing, all within a single body. This integrated design prevents rod rotation and handles side loads and torque, so you can skip an external linear guide entirely. The "B52-" prefix marks the copper-free build, intended for lines where copper and copper alloys are not permitted-such as ammonia systems or certain battery, electronics, and chemical plants. Please confirm the exact material substitutions with us for your specific application.
At bore 12, this unit generates 57 N of push force at 0.5 MPa and holds a non-rotating tolerance of +/-0.08, keeping a small gripper or blade square under an off-centre load. The steel-ball linear bearing delivers low-friction, smooth travel without the stick-slip of a plain bearing, making it well-suited for precise vertical lifts. The 6 mm piston rod on M5x0.8 ports is a compact fit for tight machine layouts.
Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL12X30S Technical Specifications
| Model | Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL12X30S |
|---|---|
| Series | TCL JIS guided (twin-rod) cylinder |
| Bore size | Ø12 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Bearing | Steel-ball linear bearing |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Non-rotating tolerance | ±0.08° (retracted) |
| Cushion | Rubber bumper |
| Max std stroke | Up to 150 mm |
Specifications follow the official AirTAC TCL/TCM series datasheet (JIS standard). Confirm against the product label before installation. Thread options: PT (blank) / G / NPT. Every TC model ships with a built-in magnet for sensor switches.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 57 N | 42 N |
| 0.7 MPa | 79 N | — |
| Max | 12 kgf | |
Force is set by the bore and piston rod (Ø6 mm); the twin guide rods carry side load and torque, not thrust. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL12X30S
| TC | Tri-rod (guided, twin-rod) cylinder, double acting. |
|---|---|
| L | Bearing: Steel-ball linear bearing (L = linear ball). |
| 12 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet (standard on TC) for a magnetic sensor switch. |
Sister type: TCM12X30 (brass sliding bearing, more impact/dust tolerant). Thread codes: blank = PT · G · T = NPT.
Where the Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL12X30S Is Used
Compact PCB Alignment
In a PCB depaneling station, the B52-TCL12X30S's +/-0.08 anti-rotation tolerance keeps a small alignment pin square while pressing components, and the low-friction bearing ensures smooth, precise travel for accurate placement.
Small Parts Vertical Lift
Use it to lift a lightweight sensor or nozzle in a pick-and-place cell. The 57 N push at 0.5 MPa handles the load, while the steel-ball bearing prevents stick-slip during vertical moves, ensuring consistent positioning.
Lab Sample Gripper
For a lab automation gripper handling small vials, the twin-rod guide resists the moment from an off-centre grip. The copper-free build is ideal for electronics or chemical labs where copper contamination is a concern.
Is the Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL12X30S the Right Cylinder?
When sizing, consider the next bore up: 16 delivers roughly 101 N of push at 0.5 MPa, a useful step if you need more force. There is no smaller bore in the TCL line, so if you need less thrust, look at the TCM6 or TCM10 models. For applications with heavy impact or dusty radial loads, the TCM series with its brass sliding bearing is the better choice. This model uses PT (tapered) ports as standard, and the built-in magnet (S) is standard, so you can fit a CS1 reed or DS1 electronic switch in one of the four sensor slots. Remember, this cylinder does not hold its load if air pressure is lost; for a fail-safe hold, add an external rod lock or a pilot-operated check valve. With a 30 mm stroke, it is within the standard range for bore 12 (up to 150 mm).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Side load / torque the guide must carry
- ✓ TCL (precision, low friction) vs TCM (impact, radial load)
- ✓ Stroke & mounting face (top / bottom / rear)
- ✓ Port/thread type (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check The guide unit takes side load & torque — but do not exceed the max safe load/torque for your stroke.
- check Mount from the top, bottom (screw or T-slot) or rear face; use the precision locating holes.
- check Do not disassemble the fixing block or guide unit — factory-set precision.
- check Fit CS1 / DS1 magnetic switches in the four sensor slots as needed.
Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL12X30S FAQ
At bore 12, the double-acting cylinder produces 57 N of push and 42 N of pull at 0.5 MPa. At 0.7 MPa, push force rises to 79 N. The theoretical maximum force is 12 kgf at 1.0 MPa. These figures are identical to the standard TCL12X30S.
The B52- prefix designates AirTAC's copper-free (copper-prohibited) build of the TCL12X30S. This means copper and copper alloys are not used in its construction, making it suitable for lines where such materials are banned, like ammonia systems. The exact material substitutions are not specified in our data, so please confirm them with us for your specific requirements.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TCL Cylinders
Request a Quote for Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL12X30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.