Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL16X75S
The AirTAC Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL16X75S is a genuine JIS-standard guided cylinder with a Ø16mm bore and 75mm stroke on twin guide rods. Its integrated steel-ball linear bearing gives low-friction, high-precision travel — well suited to vertical lifts and high-load, high-accuracy moves, holding the tool square to ±0.07° of rotation without any external linear guide.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- BearingSteel-ball linear bearing
- Non-rotating±0.07°
- CushionRubber bumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL16X75S
The B52-TCL16X75S is AirTAC's copper-free (copper-prohibited) build of the TCL16X75S, a JIS-guided twin-rod double-acting cylinder. Its steel-ball linear bearing delivers smooth, low-friction travel without stick-slip, making it ideal for precise vertical lifts and accurate positioning tasks. With a 75mm stroke, it generates 101 N of push force at 0.5 MPa and maintains a non-rotating tolerance of +/-0.07, keeping attached tooling square under off-center loads.
The "B52-" prefix designates the copper-free version, intended for environments where copper and its alloys are restricted, such as ammonia systems or certain battery and chemical plants. The exact material substitutions are not specified in our data; please confirm the specific replacement parts and any compatibility changes with us before ordering. This model includes a built-in magnet (S) for use with CS1 reed or DS1 electronic switches in its four sensor slots.
Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL16X75S Technical Specifications
| Model | Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL16X75S |
|---|---|
| Series | TCL JIS guided (twin-rod) cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Bearing | Steel-ball linear bearing |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Non-rotating tolerance | ±0.07° (retracted) |
| Cushion | Rubber bumper |
| Max std stroke | Up to 200 mm |
Specifications follow the official AirTAC TCL/TCM series datasheet (JIS standard). Confirm against the product label before installation. Thread options: PT (blank) / G / NPT. Every TC model ships with a built-in magnet for sensor switches.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 75 N |
| 0.7 MPa | 141 N | — |
| Max | 21 kgf | |
Force is set by the bore and piston rod (Ø8 mm); the twin guide rods carry side load and torque, not thrust. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL16X75S
| TC | Tri-rod (guided, twin-rod) cylinder, double acting. |
|---|---|
| L | Bearing: Steel-ball linear bearing (L = linear ball). |
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet (standard on TC) for a magnetic sensor switch. |
Sister type: TCM16X75 (brass sliding bearing, more impact/dust tolerant). Thread codes: blank = PT · G · T = NPT.
Where the Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL16X75S Is Used
Precision Component Alignment
In a CNC tool changer, the B52-TCL16X75S's +/-0.07 anti-rotation tolerance and low-friction steel-ball bearing ensure a gripper stays perfectly square to the spindle, preventing tool misalignment during high-cycle transfers. Its 101 N push at 0.5 MPa is sufficient for handling small to medium tool holders.
Vertical Lift for Electronics Assembly
For a pick-and-place unit lifting delicate circuit boards, the smooth, stick-slip-free travel of the steel-ball linear bearing prevents jarring. The copper-free construction is a key advantage in electronics cleanrooms where copper contamination is a concern, and the 75mm stroke provides ample lift height.
Lab Sample Positioning
In an automated diagnostic analyzer, this guided cylinder moves a test-tube rack between stations. The precise, low-friction motion avoids disturbing liquid samples, while the copper-free build meets the strict material requirements of some chemical and biological labs. The 101 N force is ample for the light rack weight.
Is the Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL16X75S the Right Cylinder?
When selecting between bore sizes, consider that the 12 cylinder delivers 57 N of push at 0.5 MPa, while stepping up to 20 provides 157 N. The 16 bore offers a balanced middle ground for light to medium duty applications. Choose the TCM series instead if your application involves heavy impact or dusty conditions, as its brass sliding bearing is better suited for those environments.
This cylinder does not hold its load if air pressure is lost or the valve is centered; the rod will drift. For fail-safe holding, add an external rod lock or a pilot-operated check valve. The replacement match for this unit is bore 16, stroke 75, with M5x0.8 ports and PT thread (blank code). The built-in magnet is standard. For strokes up to 200mm, this bore size supports standard travel.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Side load / torque the guide must carry
- ✓ TCL (precision, low friction) vs TCM (impact, radial load)
- ✓ Stroke & mounting face (top / bottom / rear)
- ✓ Port/thread type (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check The guide unit takes side load & torque — but do not exceed the max safe load/torque for your stroke.
- check Mount from the top, bottom (screw or T-slot) or rear face; use the precision locating holes.
- check Do not disassemble the fixing block or guide unit — factory-set precision.
- check Fit CS1 / DS1 magnetic switches in the four sensor slots as needed.
Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL16X75S FAQ
At 0.5 MPa, the push force is 101 N and the pull force is 75 N. At 0.7 MPa, the push force increases to 141 N. The theoretical maximum force is 21 kgf at 1.0 MPa. These figures are identical to the standard TCL16X75S.
The 'B52-' prefix indicates AirTAC's copper-free (copper-prohibited) build, designed for lines where copper and copper alloys are not allowed, such as ammonia systems or certain battery and electronics plants. While the dimensional and performance figures are the same as the TCL16X75S, the specific substituted materials and any changes to temperature or media compatibility are not in our data. You must confirm these exact details with us before installation. Also, note that this cylinder uses fixed TPU bumpers for end-of-stroke damping, not an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TCL Cylinders
Request a Quote for Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL16X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.