Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL32X40S
The AirTAC Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL32X40S is a genuine JIS-standard guided cylinder with a Ø32mm bore and 40mm stroke on twin guide rods. Its integrated steel-ball linear bearing gives low-friction, high-precision travel — well suited to vertical lifts and high-load, high-accuracy moves, holding the tool square to ±0.05° of rotation without any external linear guide.
- BoreØ32 mm
- Stroke40 mm
- Port size1/8"
- BearingSteel-ball linear bearing
- Non-rotating±0.05°
- CushionRubber bumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL32X40S
The B52-TCL32X40S is AirTAC's copper-free (copper-prohibited) version of the TCL32X40S, a JIS-standard guided twin-rod cylinder. Its drive piston runs between two guide rods housed in a steel-ball linear bearing, delivering smooth, precise travel without stick-slip. At 0.5 MPa, this bore generates 402 N of push force, with a non-rotating tolerance of +/-0.05 to keep attached tooling square under off-centre loads.
The leading "B52-" prefix marks this as the copper-free build, intended for lines where copper and copper alloys are not permitted-such as ammonia systems or certain battery, electronics, and chemical plants. The exact material substitutions should be confirmed with us before ordering. This 40 mm stroke suits compact vertical lifts and precise positioning tasks where space is tight.
Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL32X40S Technical Specifications
| Model | Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL32X40S |
|---|---|
| Series | TCL JIS guided (twin-rod) cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Bearing | Steel-ball linear bearing |
| Port size | 1/8" |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Non-rotating tolerance | ±0.05° (retracted) |
| Cushion | Rubber bumper |
| Max std stroke | Up to 250 mm |
Specifications follow the official AirTAC TCL/TCM series datasheet (JIS standard). Confirm against the product label before installation. Thread options: PT (blank) / G / NPT. Every TC model ships with a built-in magnet for sensor switches.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max | 82 kgf | |
Force is set by the bore and piston rod (Ø16 mm); the twin guide rods carry side load and torque, not thrust. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL32X40S
| TC | Tri-rod (guided, twin-rod) cylinder, double acting. |
|---|---|
| L | Bearing: Steel-ball linear bearing (L = linear ball). |
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet (standard on TC) for a magnetic sensor switch. |
Sister type: TCM32X40 (brass sliding bearing, more impact/dust tolerant). Thread codes: blank = PT · G · T = NPT.
Where the Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL32X40S Is Used
Compact Vertical Panel Lift
Raises a small access panel or inspection cover on a packaging line. The 402 N push at 0.5 MPa handles the weight, while the steel-ball bearing ensures smooth travel without stick-slip, and the +/-0.05 tolerance keeps the panel square to its frame.
Off-Centre Gripper Transfer
Positions a gripper that picks components from a feeder and places them into a fixture. The twin-rod guide resists the moment from the off-centre load, holding the gripper parallel to the work surface within +/-0.05 for repeatable placement.
Camera or Sensor Positioning
Moves a vision-system camera between two inspection points on an electronics assembly line. The low-friction linear bearing provides the precise, vibration-free travel needed for consistent image capture, and the 40 mm stroke fits within compact machine envelopes.
Is the Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL32X40S the Right Cylinder?
For a lighter duty, the 25 bore delivers roughly 245 N of push at 0.5 MPa, while stepping up to 40 gives you 628 N of push at the same pressure. If your application involves heavy impact, dusty environments, or significant radial loads, consider the TCM series with its brass sliding bearing instead. This model uses 1/8" ports with PT thread (tapered), and the built-in magnet (S) is standard, compatible with CS1 reed or DS1 electronic switches. Note that the cylinder does not hold its load if air pressure is lost-for a fail-safe hold, add an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Side load / torque the guide must carry
- ✓ TCL (precision, low friction) vs TCM (impact, radial load)
- ✓ Stroke & mounting face (top / bottom / rear)
- ✓ Port/thread type (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check The guide unit takes side load & torque — but do not exceed the max safe load/torque for your stroke.
- check Mount from the top, bottom (screw or T-slot) or rear face; use the precision locating holes.
- check Do not disassemble the fixing block or guide unit — factory-set precision.
- check Fit CS1 / DS1 magnetic switches in the four sensor slots as needed.
Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL32X40S FAQ
At 0.5 MPa, the cylinder produces 402 N of push and 302 N of pull. Increasing the supply to 0.7 MPa raises push to 563 N. The theoretical maximum force at 1.0 MPa is 82 kgf. These figures apply to the piston rod; the guide rods handle side load and torque, not axial thrust.
The B52- prefix designates AirTAC's copper-free (copper-prohibited) build of the TCL32X40S. It is intended for applications where copper and copper alloys are not allowed, such as ammonia systems or certain chemical, battery, and electronics plants. The specific material substitutions are not listed in our data-please confirm the exact details with us before ordering.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TCL Cylinders
Request a Quote for Airtac B52-TCL Copper-Free Triple Rod Cylinder B52-TCL32X40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.