Airtac GAFR Adjustable Filter Regulator GAFR20006SJNW
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR20006SJNW is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialPC
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight290 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR20006SJNW
The GAFR20006SJNW is a filter and regulator combined into a single body, saving space and reducing potential leak points compared to separate units. This 1/8in port model handles a standard pressure range of 0.15-0.9 MPa (20-130 psi) and comes with a 5 um element for finer filtration.
Its diversion structure spins incoming air to separate liquid water and solid particles into the 25 cc drain bowl, while the balanced regulator maintains a steady outlet pressure. Weighing just 290 g, this compact unit is ideal for small jigs and single actuators, though it requires a proper panel mount since no bracket is included.
Airtac GAFR Adjustable Filter Regulator GAFR20006SJNW Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20006SJNW |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR20006SJNW
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR20006SJNW Is Used
Precision Jig Fixturing
Feed a single pneumatic clamp or fixture with clean, regulated air. The 5 um element protects sensitive valves from fine particulates that could cause sticking or wear.
Bench Mounting
Mount this compact unit on a panel or frame to supply a small workbench station. Its light 290 g weight and 1/8in port fit neatly into tight control cabinets.
Prototype Assembly
Use in prototype machines where space is at a premium and precision matters. The integrated filter-regulator simplifies plumbing and reduces potential leak points in experimental setups.
Is the Airtac GAFR Adjustable Filter Regulator GAFR20006SJNW the Right Air-Prep Unit?
Choose the GAFR200 for small pneumatic circuits needing 1/8in ports. The 5 um element traps finer particles than the standard 40 um, making it suitable for precision valves, though it will require more frequent service. The semi-auto drain combines automatic condensate release with a manual override, and the PC bowl offers a clear view of the collected water. This model omits the mounting bracket (J) and gauge (N), so plan for panel mounting and add a gauge via the 1/8in connection if needed. The PT thread with MPa/psi scale suits standard installations. If oil is needed downstream, order the matching GAFC200-06 combination instead. Remember, 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 290 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR20006SJNW FAQ
The GAFR20006SJNW operates from 0.15 to 0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It works in temperatures from -5 to 70 C and must not freeze. The drain bowl holds 25 cc and the unit weighs 290 g.
The J code omits the mounting bracket for panel-mount installations, while the N code means no gauge is supplied. The 1/8in gauge connection remains available if you need to add one later. This configuration suits buyers who have existing brackets or prefer to source their own gauge.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR20006SJNW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.