Airtac GAFR Adjustable Filter Regulator GAFR200C06ALNW
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR200C06ALNW is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeNot fitted
- Weight290 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR200C06ALNW
This AirTAC GAFR200C06ALNW is a filter and regulator combined in a single body, saving space and reducing potential leak points compared to separate units. It handles a 1/8in port and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi) with a fine 5 um element for precision applications.
The metal bowl (25 cc) with automatic drain suits demanding environments where condensate must be expelled without manual attention. Weighing just 290 g, this compact unit is ideal for small jigs and single actuators, though its metal construction adds durability for industrial settings.
Airtac GAFR Adjustable Filter Regulator GAFR200C06ALNW Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C06ALNW |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR200C06ALNW
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR200C06ALNW Is Used
Precision valve control
Feed a single precision pneumatic valve or small instrument with the 5 um element and stable lower pressure range, protecting sensitive internals from particle wear.
Compact bench tools
Power a small bench press or clamping fixture where the 290 g body mounts directly to the frame, and the automatic drain handles condensate without daily checks.
Lab air supply
Supply a laboratory air line needing clean, low-pressure air at 0.15-0.4 MPa, where the fine 5 um element removes particles that could affect test results.
Is the Airtac GAFR Adjustable Filter Regulator GAFR200C06ALNW the Right Air-Prep Unit?
Choose the GAFR200 body for small-bore circuits; its 1/8in port and 290 g mass fit compact machines, while the 2000 L/min flow curve (at 0.7 MPa inlet) shows its sizing envelope. The metal bowl (C) is a build choice with the same 1.0 MPa max and -5 to 70 C rating as PC or nylon versions, so confirm compatibility with your environment. This model has an automatic drain (A) for wet or unattended lines, a 5 um element (W) for finer filtration, and no gauge (N) - the 1/8in gauge connection is ready if you add one later. The mounting bracket is included, and the PT thread suits standard applications. For lines needing oil downstream, order the matching GAFC200-06 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of this unit's regulated range.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 290 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR200C06ALNW FAQ
The GAFR200C06ALNW is a filter & regulator with a 1/8in port, 0.15-0.4 MPa (20-58 psi) working range, 1.0 MPa (145 psi) max pressure, 1.5 MPa (215 psi) proof pressure, and -5 to 70 C temperature range. It has a 25 cc metal drain bowl, weighs 290 g, and uses a 5 um element.
The 'N' after the port code means no gauge is supplied, reducing cost and panel space. The 1/8in gauge connection is present on the body, so you can fit an AirTAC gauge later if you need to read the set pressure directly.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR200C06ALNW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.