Airtac GAFR Adjustable Filter Regulator GAFR200C06ASJNK
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR200C06ASJNK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeNot fitted
- Weight290 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR200C06ASJNK
The GAFR200C06ASJNK is a genuine AirTAC filter and regulator combined into a single body, saving space on a compact machine. It handles a 1/8in port with a standard pressure range of 0.15-0.9 MPa (20-130 psi) and uses a 40 um element to trap particulates.
This model features a metal bowl and an automatic drain, making it suitable for wet environments where manual checks are impractical. The reverse-flow valve is fitted as an ordering difference. It weighs 290 g and has a 25 cc condensate bowl, so it is best supported by a bracket or panel rather than tubing.
Airtac GAFR Adjustable Filter Regulator GAFR200C06ASJNK Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C06ASJNK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR200C06ASJNK
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR200C06ASJNK Is Used
Compact jig actuation
Feed a single pneumatic jig or fixture on an assembly bench where space is tight and a 1/8in port matches the cylinder demand.
Prototype test rigs
Use on a lab or R&D setup to supply clean, regulated air to a single valve or small actuator without taking up excess rail space.
Bench-top tools
Power a small air tool or blow-off station where the automatic drain and metal bowl reduce maintenance in a workshop environment.
Is the Airtac GAFR Adjustable Filter Regulator GAFR200C06ASJNK the Right Air-Prep Unit?
Choose this GAFR200 for small jigs or single actuators where a 1/8in port is sufficient. The metal bowl offers a different build choice compared to PC or nylon, though all share the same 1.0 MPa max pressure and -5 to 70 C range. The automatic drain handles condensate without manual intervention, and the absence of a gauge means the 1/8in gauge connection is available if you add one later. Since the bracket is omitted (J), plan for a panel mount or existing bracket. If your line needs lubrication downstream, the matching GAFC200-06 combination adds a lubricator. Remember that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 290 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR200C06ASJNK FAQ
It has a 1/8in port, a working pressure range of 0.15-0.9 MPa (20-130 psi), a max pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. The drain bowl holds 25 cc and the unit weighs 290 g.
The metal bowl (C) is a build choice that differs from PC or nylon, but all materials share the same pressure and temperature ratings. The no-gauge option (N) means no gauge is supplied; the 1/8in gauge connection is there if you need to add one later.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR200C06ASJNK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.