Airtac GAFR Adjustable Filter Regulator GAFR200C06LJ
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR200C06LJ is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight290 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR200C06LJ
The GAFR200C06LJ is a filter and regulator combined into a single compact body, eliminating the need for separate GAF filter and GAR regulator units. This 1/8in port model weighs just 290 g and uses a metal bowl, with the filter element and pressure adjustment mechanism sharing one housing to reduce potential leak points.
This lower-pressure variant regulates from 0.15 to 0.4 MPa (20-58 psi) and filters to 40 um. The circular gauge with MPa/psi scale is fitted, and both semi-auto and manual drains are included. The diversion structure spins incoming air to separate liquid water and solid particles into the 25 cc condensate bowl, keeping the downstream line clean.
Airtac GAFR Adjustable Filter Regulator GAFR200C06LJ Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C06LJ |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR200C06LJ
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR200C06LJ Is Used
Precision Jig Operation
Feed a single small clamping jig or fixture on an assembly bench with clean, regulated air at a stable lower pressure to avoid over-forcing delicate workpieces.
Compact Bench Tool
Supply a small pneumatic hand tool or a single-acting actuator where a 1/8in port matches the tool inlet and the 290 g body mounts directly to a panel or frame.
Laboratory Air Supply
Provide filtered, low-pressure air to a lab fixture or test setup that requires a gentle, steady 0.15-0.4 MPa supply without the bulk of a larger filter regulator.
Is the Airtac GAFR Adjustable Filter Regulator GAFR200C06LJ the Right Air-Prep Unit?
Choose this GAFR200C06LJ when your application needs a compact 1/8in port with a lower pressure ceiling of 0.4 MPa. The metal bowl suits environments where a transparent bowl might be a concern, though the same -5 to 70 C temperature range applies to all bowl options. The J code means no mounting bracket is included, so plan for panel mounting or an existing bracket solution. The 40 um element is standard; upgrade to a 5 um W element for finer filtration. This unit ships with both semi-auto and manual drains, and the PT thread gives an MPa/psi gauge scale. If you need lubrication downstream, order the matching GAFC200-06 combination instead. Note that the 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so this lower-pressure regulator has generous inlet headroom for stable output.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 290 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR200C06LJ FAQ
The GAFR200C06LJ is a filter & regulator with a 1/8in port, working pressure range of 0.15-0.4 MPa (20-58 psi), maximum pressure of 1.0 MPa (145 psi), proof pressure of 1.5 MPa (215 psi), and temperature range of -5 to 70 C. It has a 25 cc drain bowl and weighs 290 g. The unit filters to 40 um and comes with a metal bowl, no mounting bracket, and a fitted circular gauge with MPa/psi scale.
The L code designates the lower-pressure type, regulating from 0.15 to 0.4 MPa instead of the standard 0.15-0.9 MPa, which is ideal for sensitive applications that must not exceed 0.4 MPa. The J code means the mounting bracket is omitted, so you must use an existing bracket or panel-mount the unit. This model also features a metal bowl and both semi-auto and manual drains.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR200C06LJ
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.