Airtac GAFR Adjustable Filter Regulator GAFR200C06SJN
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR200C06SJN is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight290 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR200C06SJN
The GAFR200C06SJN is a filter and regulator combined into a single body, so it cleans incoming air and sets a steady outlet pressure without needing separate components. This model uses a 1/8in port, a 0.15-0.9 MPa (20-130 psi) working range, and a 40 um element, with a metal bowl for the condensate.
Because the filter and regulator share one housing, there are fewer joints to seal and less rail width required than with a separate GAF filter plus GAR regulator. The diversion structure spins the air to separate liquid water and solid particles into the 25 cc drain bowl, while the pressed-in self-locking knob resists set-pressure drift from vibration.
Airtac GAFR Adjustable Filter Regulator GAFR200C06SJN Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C06SJN |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR200C06SJN
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR200C06SJN Is Used
Precision Jig Actuation
Feed a single pneumatic actuator on a small assembly jig with clean, regulated air. The 1/8in port and 290 g weight suit compact fixtures, while the 40 um element protects the valve from particle wear.
Bench-Mounted Test Rig
Use this unit on a bench test rig where a stable 0.15-0.9 MPa supply is needed for a small cylinder. The metal bowl handles frequent draining, and the semi-auto drain gives manual control over condensate release.
Prototype Machine Build
Incorporate the GAFR200C06SJN into a prototype machine where space is limited. The combined filter-regulator body reduces plumbing points, and the no-bracket design lets you mount it directly to a panel.
Is the Airtac GAFR Adjustable Filter Regulator GAFR200C06SJN the Right Air-Prep Unit?
Choose the GAFR200 body for small jigs or single actuators where space is tight, as it weighs only 290 g and has a 1/8in port. The metal bowl (C) is a build choice, but the common specification of 1.0 MPa max pressure and -5 to 70 C applies to all bowl materials, so confirm compatibility for aggressive surroundings. This model has the semi-auto and manual drain both fitted, and the J code means the mounting bracket is omitted, so plan for a panel mount or an existing bracket. The N after the port means no gauge is supplied; if you add one later, the gauge connection is 1/8in. The standard S type covers 0.15-0.9 MPa, and the 40 um element is the default; choose the 5 um element for finer filtration. The PT thread gives a MPa/psi gauge scale, and no reverse-flow valve is fitted. If the line needs lubrication downstream, order the matching GAFC200-06 combination instead, as this unit does not lubricate. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan a supply near 1.0 MPa if you need 0.9 MPa outlet.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 290 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR200C06SJN FAQ
The GAFR200C06SJN is a filter & regulator with a 1/8in port, a pressure range of 0.15-0.9 MPa (20-130 psi), a max pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the drain bowl capacity is 25 cc, and the weight is 290 g. It uses a 40 um element and has a semi-auto plus manual drain.
The N code in GAFR200C06SJN means no gauge is supplied, which is useful when you want to fit your own pressure gauge or when the set pressure is monitored elsewhere. If you add a gauge later, the connection size for the GAFR200 body is 1/8in. Without a gauge, you cannot read the set pressure directly on the unit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR200C06SJN
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.