Airtac GAFR Adjustable Filter Regulator GAFR200N06ASJN
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR200N06ASJN is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeNot fitted
- Weight290 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR200N06ASJN
The GAFR200N06ASJN is a genuine AirTAC filter & regulator, combining air filtration and pressure regulation into a single compact body. This 1/8in port model is rated for 0.15-0.9 MPa (20-130 psi) and comes with a 40 um element, an automatic drain, and a nylon bowl.
Its diversion structure spins incoming air to separate liquid water and solid particles into the 25 cc drain bowl, while the balanced, self-locking regulator holds the set outlet pressure steady. Weighing just 290 g, it is a space-saving choice for small pneumatic circuits where a separate filter and regulator would be too bulky.
Airtac GAFR Adjustable Filter Regulator GAFR200N06ASJN Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06ASJN |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR200N06ASJN
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR200N06ASJN Is Used
Compact Jig Fixtures
Feed a single pneumatic clamp or small jig on an assembly bench. The 1/8in port and light 290 g body mount directly to the fixture frame.
Bench-top Pneumatic Tools
Supply a small air tool or a manual work station where clean, regulated air at a set pressure is needed. The automatic drain keeps the 25 cc bowl from filling during light use.
Lab Test Rigs
Use in a laboratory setup that needs a stable, filtered air supply for a single test cylinder or a small pressure vessel. The 40 um element protects sensitive components.
Is the Airtac GAFR Adjustable Filter Regulator GAFR200N06ASJN the Right Air-Prep Unit?
This GAFR200 is the smallest body in the series, with a 1/8in port and a 2000 L/min flow envelope plotted at 0.7 MPa inlet. It suits compact machines and single actuators; for higher flow, step up to a GAFR300 body with its 3500 L/min envelope. The nylon bowl is a build choice, while the automatic drain suits unattended or wet lines. This model omits the mounting bracket (J) and the gauge (N); the 1/8in gauge connection is ready if you add one later. The 40 um element is the standard grade, and the PT thread has an MPa/psi gauge scale. If you need lubrication downstream, order the matching GAFC200-06 combination instead. Note that the 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 290 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR200N06ASJN FAQ
It is a filter & regulator with a 1/8in port. The pressure range is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 25 cc drain bowl, and weighs 290 g. The element is 40 um, and it has an automatic drain.
The 'N' after the port code means no gauge is supplied, leaving a 1/8in gauge connection for you to fit one if needed. The 'J' means the mounting bracket is omitted, which is useful if you are panel-mounting the unit or using an existing bracket. Both options reduce the initial part count and cost.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR200N06ASJN
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.