Airtac GAFR Adjustable Filter Regulator GAFR200N06ASWK
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR200N06ASWK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight290 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR200N06ASWK
This AirTAC GAFR200N06ASWK is a filter and regulator combined into one compact body, saving rail space compared to separate units. It handles a 1/8in port and delivers a steady 0.15-0.9 MPa (20-130 psi) output, with a 5 um element for fine filtration.
The nylon bowl collects condensate, and the automatic drain clears it without manual attention. A circular gauge with MPa/psi scale is fitted, and the reverse-flow valve is attached as an ordering option. This 290 g unit is built for small pneumatic circuits.
Airtac GAFR Adjustable Filter Regulator GAFR200N06ASWK Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06ASWK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR200N06ASWK
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR200N06ASWK Is Used
Precision jig
Feed a small clamping jig on an assembly bench, where the 5 um element protects fine valve pilots from particle wear.
Bench tool
Supply a handheld pneumatic screwdriver or grinder in a repair shop, with the automatic drain reducing maintenance stops.
Lab air
Provide clean, regulated air to a small laboratory fixture, where the nylon bowl resists handling in routine use.
Is the Airtac GAFR Adjustable Filter Regulator GAFR200N06ASWK the Right Air-Prep Unit?
Choose this GAFR200 for small jigs or single actuators where a 1/8in port matches the line. The nylon bowl offers an alternative to PC, while the automatic drain suits wet or unattended lines. The 5 um element traps finer particles than the standard 40 um, and the included bracket simplifies mounting. The fitted gauge reads in MPa/psi, and the reflux valve is present. For lines needing oil downstream, order the GAFC200-06 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 290 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR200N06ASWK FAQ
Working pressure is 0.15-0.9 MPa (20-130 psi). Maximum pressure is 1.0 MPa (145 psi) and proof pressure is 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 25 cc and the unit weighs 290 g.
The K indicates a reverse-flow (reflux) valve is fitted. It is an ordering difference from the standard version, and its function is detailed in the catalogue. This unit still does not lubricate.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR200N06ASWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.