Airtac GAFR Adjustable Filter Regulator GAFR200N06LJNWK
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR200N06LJNWK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight290 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR200N06LJNWK
The GAFR200N06LJNWK is a filter and regulator combined into a single body, so it cleans incoming air and stabilizes outlet pressure without needing separate components. This unit has a 1/8in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 5 um element for trapping fine particles.
Its 25 cc nylon condensate bowl collects water and solids separated by the diversion structure, while the pressed-in self-locking knob resists drift from vibration. The gauge is omitted, leaving a 1/8in gauge connection available if you need to add one later.
Airtac GAFR Adjustable Filter Regulator GAFR200N06LJNWK Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06LJNWK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR200N06LJNWK
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR200N06LJNWK Is Used
Compact jig actuation
Feed a single pneumatic jig or fixture with regulated air at low pressure, where the 5 um element protects sensitive moving parts from fine abrasive dust.
Bench assembly tools
Supply a small bench press or tightening tool with clean, stable air at up to 0.4 MPa, keeping the set pressure steady during short duty cycles.
Lab air supply
Deliver filtered air at low pressure to a laboratory fixture or test rig, where fine filtration matters and the compact 290 g body fits tight spaces.
Is the Airtac GAFR Adjustable Filter Regulator GAFR200N06LJNWK the Right Air-Prep Unit?
This GAFR200 is the smallest body in the series at 290 g, with a 1/8in port suited for compact jigs or single actuators. The nylon bowl offers a build choice without altering the common 1.0 MPa (145 psi) maximum pressure, and the 5 um element suits precision valves but requires more frequent service than the 40 um standard. It ships with both semi-auto and manual drains, no mounting bracket (J), and a reverse-flow valve (K) fitted as an ordering difference. The PT thread carries an MPa/psi gauge scale if you add a gauge. For lines needing oil downstream, order the matching GAFC200-06 combination instead. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 290 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR200N06LJNWK FAQ
Pressure range is 0.15-0.4 MPa (20-58 psi), maximum pressure is 1.0 MPa (145 psi), and proof pressure is 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 25 cc and the unit weighs 290 g.
The N after the port code means no gauge is supplied, leaving a 1/8in connection for adding one. The J code omits the mounting bracket, so you must use an existing bracket or panel mount. This reduces cost when those accessories are already available.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR200N06LJNWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.