Airtac GAFR Adjustable Filter Regulator GAFR200N08ALK
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR200N08ALK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/4"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight290 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR200N08ALK
The GAFR200N08ALK is a filter and regulator combined into a single body, eliminating the need for separate GAF and GAR units. It cleans incoming air via a diversion structure that spins out liquid water and solid particles, then delivers a steady outlet pressure through a balanced, self-locking regulator. This model has a 1/4in port, a 0.15-0.4 MPa (20-58 psi) lower-pressure range, and a 40 um element.
Its nylon bowl and automatic drain make it suited for applications where condensate must be expelled without manual intervention. The unit weighs 290 g, and its gauge connection is 1/8in. The pressed-in self-locking knob resists set-pressure drift from vibration, keeping the outlet stable in dynamic environments.
Airtac GAFR Adjustable Filter Regulator GAFR200N08ALK Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N08ALK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR200N08ALK
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR200N08ALK Is Used
Precision Fixtures
Feed a single precision fixture or a small indexing table that needs clean, regulated air at a lower pressure. The automatic drain keeps the bowl from filling during long production runs.
Lab Air Supply
Supply a laboratory bench with filtered air at a stable 0.15-0.4 MPa for pneumatic controls on test equipment. The nylon bowl resists fogging, allowing visual confirmation of condensate level.
Bench Pneumatics
Power a small pneumatic hand tool or a single-acting cylinder on a workbench. The compact 290 g body mounts directly to a frame, and the self-locking knob holds the pressure setpoint.
Is the Airtac GAFR Adjustable Filter Regulator GAFR200N08ALK the Right Air-Prep Unit?
Choose the GAFR200N08ALK for a compact, lower-pressure air prep station with a 1/4in port. The nylon bowl offers an alternative to PC or metal, while the automatic drain handles wet lines without manual checks. The included bracket simplifies mounting, and the fitted gauge with MPa/psi scale shows the set pressure directly. The 40 um element handles general shop air; if finer filtration is needed, consider the 5 um element option. The reverse-flow (reflux) valve is fitted as an ordering difference. If lubrication is required downstream, order the matching GAFC200-08 combination instead. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (1/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 290 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR200N08ALK FAQ
This filter & regulator has a working pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C and must not freeze. The drain bowl capacity is 25 cc, and the unit weighs 290 g.
The 'K' indicates that a reverse-flow (reflux) valve is fitted to this unit. This is an ordering difference from models without the 'K' suffix. The function of the valve is detailed in the full AirTAC catalogue; this model simply includes it as a factory-fitted option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR200N08ALK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.