Airtac GAFR Adjustable Filter Regulator GAFR200N08ASNWK
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR200N08ASNWK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/4"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeNot fitted
- Weight290 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR200N08ASNWK
The GAFR200N08ASNWK is a genuine AirTAC filter & regulator with both functions in one body, replacing a separate GAF filter and GAR regulator. This 1/4in port unit weighs 290 g and carries a 5 um element, with a nylon bowl and an automatic drain.
It regulates from 0.15 to 0.9 MPa (20-130 psi) and its diversion structure spins the air to separate liquid water and solid particles into the 25 cc condensate bowl. The pressed-in self-locking knob resists set-pressure drift from vibration, and the reverse-flow valve is fitted as an ordering difference.
Airtac GAFR Adjustable Filter Regulator GAFR200N08ASNWK Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N08ASNWK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR200N08ASNWK
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-08 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/4" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-08 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR200N08ASNWK Is Used
Precision jig
Feed a single small jig or fixture with clean, regulated air at a steady 0.15-0.9 MPa. The 5 um element protects fine orifices in pilot valves and small actuators.
Lab air line
Supply a test bench or instrument air line where the 5 um filtration removes fine particulates and the automatic drain handles condensate without manual attention.
Bench station
Mount this 290 g unit on a maintenance bench to feed a single pneumatic tool or cylinder. The included bracket simplifies panel installation.
Is the Airtac GAFR Adjustable Filter Regulator GAFR200N08ASNWK the Right Air-Prep Unit?
This GAFR200 body suits 1/8in or 1/4in ports and weighs 290 g, so it needs a proper panel mount rather than tubing support. The nylon bowl is a build choice; the automatic drain suits wet or unattended lines, and the 5 um element traps finer particles for precision work. The mounting bracket is included, while the no-gauge version leaves a 1/8in connection for adding one later. The PT thread carries an MPa/psi gauge scale, and the reflux valve is fitted. For oil downstream, order the matching GAFC200-08 combination. Max supply 1.0 MPa leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (1/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 290 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-08 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR200N08ASNWK FAQ
Working pressure range is 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature -5 to 70 C. The drain bowl holds 25 cc and the unit weighs 290 g.
The reverse-flow (reflux) valve is fitted as an ordering difference. Its function is detailed in the catalogue page not included in our data; it is named here only to distinguish this model from the standard version.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR200N08ASNWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.