Airtac GAFR Adjustable Filter Regulator GAFR30010ALW
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR30010ALW is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size3/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialPC
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight500 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR30010ALW
The GAFR30010ALW is a filter and regulator combined into a single body, so incoming air is cleaned and then set to a steady outlet pressure without needing separate parts. This model uses a 3/8in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 5 um element that traps finer particles for sensitive equipment.
Its automatic drain clears condensate without manual attention, and the 60 cc bowl holds the collected water and solids. The circular gauge with MPa/psi scale is fitted, and the mounting bracket is included. This unit does not lubricate; if oil is needed downstream, order the matching GAFC300-10 combination instead.
Airtac GAFR Adjustable Filter Regulator GAFR30010ALW Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010ALW |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR30010ALW
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR30010ALW Is Used
Precision valve control
Feed a bank of precision pneumatic valves on a small assembly station. The 5 um element protects fine internal passages, and the lower-pressure range suits delicate actuation tasks.
Lab air supply
Supply clean, regulated air to a laboratory fixture or test bench. The automatic drain keeps the 60 cc bowl from overflowing during long experiments, and the gauge shows set pressure at a glance.
Single actuator line
Power one air cylinder or a small rotary actuator on a dedicated line. The 3/8in port and 500 g body handle moderate flow, while the lower-pressure range protects light-duty components.
Is the Airtac GAFR Adjustable Filter Regulator GAFR30010ALW the Right Air-Prep Unit?
Choose the GAFR300 body for medium-flow lines; its 60 cc drain bowl and 500 g weight suit a panel or frame mount. The 3/8in port matches common shop air drops, while the 5 um element (W) filters finer than the standard 40 um for precision valves or instrument air. The automatic drain (A) handles unattended or wet lines, and the lower-pressure type (L) caps output at 0.4 MPa - verify your machine never needs more. The bracket is included, the gauge is fitted with MPa/psi scale (PT thread), and no reflux valve is attached. For lubrication downstream, the GAFC300-10 adds that function. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (3/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 60 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 500 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR30010ALW FAQ
This filter & regulator has a pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 60 cc and the unit weighs 500 g. The element is 5 um and the drain is automatic.
The L type tops out at 0.4 MPa, which is about 44% of the standard type's 0.9 MPa ceiling - choose it only if your application never needs more pressure. The 5 um element traps much finer particles than the standard 40 um, protecting precision valves and instruments, though it will require more frequent service.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR30010ALW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.