Airtac GAFR Adjustable Filter Regulator GAFR30010LJK
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR30010LJK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size3/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialPC
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight500 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR30010LJK
The GAFR30010LJK is a filter and pressure regulator combined into a single body, so incoming air is cleaned and then set to a steady outlet pressure without needing separate components. This 3/8in unit operates in the lower 0.15-0.4 MPa (20-58 psi) band and uses a 40 um element to trap solids and liquid water.
A balanced regulator mechanism keeps the outlet steady as supply pressure varies, while the pressed-in self-locking knob resists drift from vibration. The 60 cc condensate bowl collects what the diversion structure spins out, and the included circular gauge with MPa/psi scale lets you read the set pressure directly.
Airtac GAFR Adjustable Filter Regulator GAFR30010LJK Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30010LJK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR30010LJK
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR30010LJK Is Used
Precision valve actuation
Feed a single precision pneumatic valve or small actuator that requires a stable, lower regulated pressure without the risk of over-pressurizing sensitive components.
Bench test rigs
Use on a lab or workbench test setup where a compact 3/8in unit with a 40 um filter protects instruments and the lower pressure range suits delicate calibration work.
Assembly line fixtures
Mount on a light assembly fixture where the 500 g body and included gauge allow operators to verify set pressure, while the semi-auto drain suits regular maintenance schedules.
Is the Airtac GAFR Adjustable Filter Regulator GAFR30010LJK the Right Air-Prep Unit?
Choose the GAFR300 body for 3/8in ports with a 500 g mass and a flow curve plotted to 3500 L/min at 0.7 MPa inlet, a step up from the GAFR200's 2000 L/min envelope. This model has a PC bowl, a semi-auto drain plus manual drain, a 40 um element, and no mounting bracket (J), so plan for panel mounting or an existing bracket. The PT thread means the gauge reads MPa/psi, and the K code adds a reverse-flow valve as an ordering difference. If the line needs oil downstream, order the matching GAFC300-10 combination instead. 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (3/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 60 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 500 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR30010LJK FAQ
The GAFR30010LJK is a filter & regulator with a 3/8in port, 0.15-0.4 MPa (20-58 psi) working range, 1.0 MPa (145 psi) max pressure, 1.5 MPa (215 psi) proof pressure, and -5 to 70 C temperature range. It has a 60 cc drain bowl, weighs 500 g, uses a 40 um element, and includes a circular gauge with MPa/psi scale.
The K indicates a reverse-flow (reflux) valve is fitted to the GAFR30010LJK. It is an ordering difference from models without the K code, and its function is detailed in the catalogue page not included in our data. The unit still filters and regulates in one body without any lubricator.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR30010LJK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.