Airtac GAFR Adjustable Filter Regulator GAFR300C08ASJ
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR300C08ASJ is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/4"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight500 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR300C08ASJ
This AirTAC GAFR300C08ASJ is a filter and regulator combined into a single body, saving space and reducing potential leak points compared to separate units. It handles 1/4in ports and delivers a steady 0.15-0.9 MPa (20-130 psi) outlet, with a 40 um element protecting downstream components.
The metal bowl holds 60 cc of condensate, and the automatic drain clears it without manual attention. Weighing 500 g, this unit is suited for panel or frame mounting rather than being supported by tubing alone.
Airtac GAFR Adjustable Filter Regulator GAFR300C08ASJ Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C08ASJ |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR300C08ASJ
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR300C08ASJ Is Used
Precision Fixtures
Feed a single precision clamping fixture with clean, regulated air. The 40 um element and stable output protect sensitive work-holding valves.
Test Benches
Supply a manual test bench where operators need a reliable pressure setting. The self-locking knob resists drift from bench vibration.
Light Assembly Lines
Power small pneumatic actuators on a light assembly line. The automatic drain reduces maintenance on lines with intermittent moisture.
Is the Airtac GAFR Adjustable Filter Regulator GAFR300C08ASJ the Right Air-Prep Unit?
Choose the GAFR300 body for 1/4in or 3/8in ports, with a flow curve plotted to 3500 L/min at 0.7 MPa inlet. The metal bowl (C) is a build choice; all bowl materials share the same 1.0 MPa max and -5 to 70 C range. This model has an automatic drain (A) for wet lines, no mounting bracket (J), and a fitted gauge reading MPa/psi. The standard type (S) covers 0.15-0.9 MPa, and the 40 um element is the default. If oil is needed downstream, order the matching GAFC300-08 combination instead. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (1/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 60 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 500 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR300C08ASJ FAQ
The GAFR300C08ASJ has a 1/4in port, a pressure range of 0.15-0.9 MPa (20-130 psi), a max pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g.
The 'C' indicates a metal bowl. This is a build and environment choice; the pressure and temperature ratings are the same as for PC or nylon bowls. Confirm compatibility for aggressive surroundings.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR300C08ASJ
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.