Airtac GAFR Adjustable Filter Regulator GAFR300C08LNWK
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR300C08LNWK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/4"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight500 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR300C08LNWK
The GAFR300C08LNWK is a filter and regulator combined into a single body, so the incoming air is cleaned and then set to a steady outlet pressure without needing separate components. This model uses a 1/4in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 5 um element for finer filtration.
The metal bowl holds 60 cc of condensate, and the unit weighs 500 g. It includes a semi-auto drain plus a manual drain, and it ships with the mounting bracket. A reverse-flow (reflux) valve is fitted, and no gauge is supplied; the 1/8in gauge connection is available if one is added later.
Airtac GAFR Adjustable Filter Regulator GAFR300C08LNWK Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C08LNWK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR300C08LNWK
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR300C08LNWK Is Used
Precision fixturing
Feed a single pneumatic clamp or small fixture where a stable lower pressure protects delicate parts from over-force.
Lab air supply
Provide filtered air at a controlled low pressure to a bench-top instrument that cannot tolerate supply swings.
Light assembly line
Supply a compact assembly station with clean air at a consistent pressure for small actuators and valves.
Is the Airtac GAFR Adjustable Filter Regulator GAFR300C08LNWK the Right Air-Prep Unit?
Choose the GAFR300 body when you need a 1/4in port and a 60 cc drain bowl; it is lighter than the GAFR400 (880 g) and its flow curve is plotted to 3500 L/min at 0.7 MPa inlet, versus 7000 L/min for the GAFR400. The metal bowl is a build choice for the environment, and the 5 um element traps finer particles than the standard 40 um, though it will need more frequent service. The lower-pressure type tops out at 0.4 MPa, so confirm the application never needs more; the semi-auto and manual drains are both fitted, and the bracket is included. The PT thread uses an MPa/psi gauge scale, and the reflux valve is an ordering difference only. If oil is needed downstream, order the matching GAFC300-08 combination. Max supply 1.0 MPa leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (1/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 60 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 500 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR300C08LNWK FAQ
The GAFR300C08LNWK operates from 0.15 to 0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 60 cc, and the unit weighs 500 g.
The L code designates a lower-pressure regulator, capped at 0.4 MPa instead of the standard 0.9 MPa. This suits applications needing a gentle, stable outlet, but it cannot supply higher pressures if the machine's needs change.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR300C08LNWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.