Airtac GAFR Adjustable Filter Regulator GAFR300C10SJK
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR300C10SJK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size3/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight500 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR300C10SJK
The GAFR300C10SJK is a filter and pressure regulator combined in a single body, so incoming air is spun to separate liquid water and solid particles before the balanced regulator holds a steady outlet pressure. This 3/8in unit works in the standard 0.15-0.9 MPa (20-130 psi) band with a 40 um element and a metal bowl.
With a 500 g mass and a 60 cc condensate bowl, this size class suits a machine sub-header or a small multi-actuator station. The pressed-in self-locking knob resists set-pressure drift from vibration, and the metal bowl is a build choice for the line environment.
Airtac GAFR Adjustable Filter Regulator GAFR300C10SJK Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C10SJK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR300C10SJK
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR300C10SJK Is Used
Machine sub-header feed
Feed a small machining station's pneumatic valves with filtered, regulated air at a stable 0.15-0.9 MPa. The 40 um element protects sensitive pilot valves from particle wear.
Assembly line actuator
Supply a single 3/8in line to a pick-and-place actuator on an assembly bench. The semi-auto drain lets an operator empty the 60 cc bowl during shift checks.
Test rig air supply
Use on a prototype test rig where a steady outlet pressure matters. The self-locking knob keeps the setpoint stable when nearby equipment vibrates the panel.
Is the Airtac GAFR Adjustable Filter Regulator GAFR300C10SJK the Right Air-Prep Unit?
Choose the GAFR300 body when your flow demand sits between the GAFR200 (plotted to 2000 L/min at 0.7 MPa inlet) and the GAFR400 (plotted to 7000 L/min at 0.7 MPa inlet). This model carries a metal bowl, a semi-auto plus manual drain, no mounting bracket, a fitted gauge with MPa/psi scale, and a reverse-flow valve as an ordering difference. If the line needs oil downstream, order the matching GAFC300-10 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range.
Quick checklist
- ✓ Body size for your peak flow (3/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 60 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 500 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR300C10SJK FAQ
Working pressure range is 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C. The drain bowl holds 60 cc and the unit weighs 500 g. It has a 3/8in port, 40 um element, and a metal bowl.
The K code means a reverse-flow (reflux) valve is fitted. It is an ordering difference from the standard GAFR300; the catalogue defers its function to a separate page. If you do not need it, order a GAFR300 without the K suffix.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR300C10SJK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.