Airtac GAFR Adjustable Filter Regulator GAFR300C10SNW
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR300C10SNW is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size3/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight500 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR300C10SNW
The GAFR300C10SNW is a filter and pressure regulator combined into one body, so a single unit both cleans the air and holds a steady outlet pressure. This 3/8in version has a metal bowl, a 5 um element, and a working range of 0.15-0.9 MPa (20-130 psi).
The diversion structure spins the incoming air to separate liquid water and solid particles into the 60 cc condensate bowl, while the balanced regulator keeps the set pressure stable as supply varies. The pressed-in self-locking knob resists drift from vibration, and the unit weighs 500 g, so it needs a proper panel or frame mount rather than support from the tubing.
Airtac GAFR Adjustable Filter Regulator GAFR300C10SNW Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C10SNW |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 3/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR300C10SNW
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-10 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 3/8" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-10 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR300C10SNW Is Used
Precision valve control
Feed a 5 um filtered supply to precision pneumatic valves on a small assembly station, where fine particles could otherwise cause sticking or premature wear.
Single actuator line
Protect one air cylinder or rotary actuator on a dedicated line, using the 3/8in port to match the actuator's flow demand without oversizing the filter.
Machine tool cabinet
Mount inside a machine tool electrical cabinet to supply clean, regulated air to solenoid valves and sensors, with the metal bowl suited to a shop-floor environment.
Is the Airtac GAFR Adjustable Filter Regulator GAFR300C10SNW the Right Air-Prep Unit?
Choose the GAFR300 size class for 1/4in to 1/2in port lines; this 3/8in model sits between the smaller GAFR200 and the larger GAFR400, whose flow envelope is plotted to 7000 L/min at 0.7 MPa inlet. The metal bowl is a build choice for the environment, and the 5 um element traps finer particles than the standard 40 um, at the cost of more frequent element service. This unit ships with the mounting bracket and a semi-auto plus manual drain; the A code would replace that with an automatic drain, and the J code would omit the bracket. No gauge is fitted, so the set pressure cannot be read without adding one to the 1/8in gauge connection. The PT thread gives an MPa/psi gauge scale; G and NPT are available. If oil is needed downstream, order the matching GAFC300-10 combination instead. 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (3/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 60 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 500 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-10 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR300C10SNW FAQ
The GAFR300C10SNW is a filter & regulator with a 3/8in port, a 5 um element, and a metal bowl. The pressure range is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the drain bowl holds 60 cc, and the unit weighs 500 g.
The N code after the port means no gauge is supplied, so the set pressure cannot be read without adding one. The gauge connection on the GAFR300 body is 1/8in, so a standard 1/8in gauge can be fitted later if needed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR300C10SNW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.