Airtac GAFR Adjustable Filter Regulator GAFR300C15ALJNW
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR300C15ALJNW is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/2"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeNot fitted
- Weight500 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR300C15ALJNW
The GAFR300C15ALJNW is a filter and regulator combined into a single body, so incoming air is cleaned and then set to a steady outlet pressure without needing separate units. This version uses a metal bowl, has no gauge, and omits the mounting bracket.
It handles a lower pressure band of 0.15-0.4 MPa (20-58 psi) and filters down to 5 um. The 1/2in port and 500 g weight place it in the mid-size GAFR300 class, with a 60 cc condensate bowl and a flow curve plotted to 3500 L/min at 0.7 MPa inlet.
Airtac GAFR Adjustable Filter Regulator GAFR300C15ALJNW Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C15ALJNW |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR300C15ALJNW
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR300C15ALJNW Is Used
Precision valve control
Feed a bank of precision pneumatic valves that require clean, regulated air at a consistent lower pressure. The 5 um element protects sensitive internals from fine particulates.
Wet utility line
Install on a wet factory air line where condensate is frequent. The automatic drain clears water without operator intervention, and the metal bowl handles the environment.
Bench test rig
Supply a bench-mounted test fixture with a stable 0.15-0.4 MPa air supply. The compact GAFR300 body fits easily into a panel layout, though you will need to provide the mounting.
Is the Airtac GAFR Adjustable Filter Regulator GAFR300C15ALJNW the Right Air-Prep Unit?
Choose this GAFR300 when you need a 1/2in port with a lower 0.15-0.4 MPa (20-58 psi) regulated range. The metal bowl suits industrial environments, while the automatic drain handles wet lines without manual attention. The 5 um element traps finer particles than the standard 40 um, and the lack of a gauge means you must add one via the 1/8in connection if you need to read pressure. The J code means no bracket is included, so plan for panel mounting or an existing support. If oil is needed downstream, order the matching GAFC300-15 combination instead. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (1/2" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 60 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 500 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR300C15ALJNW FAQ
Pressure range is 0.15-0.4 MPa (20-58 psi), max pressure is 1.0 MPa (145 psi), proof pressure is 1.5 MPa (215 psi), temperature range is -5 to 70 C. The drain bowl holds 60 cc and the unit weighs 500 g.
The N after the port code means no gauge is supplied, so you must add one via the 1/8in gauge connection to read outlet pressure. The J code omits the mounting bracket, which suits panel-mount installations or cases where you already have a bracket.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR300C15ALJNW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.