Airtac GAFR Adjustable Filter Regulator GAFR300C15LJK
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR300C15LJK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/2"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight500 g
About the Airtac GAFR Adjustable Filter Regulator GAFR300C15LJK
The GAFR300C15LJK is a filter and regulator combined into a single body, so incoming air is spun to separate liquid water and trap solid particles before a balanced regulator sets a steady outlet pressure. This 1/2in model operates in the lower 0.15-0.4 MPa (20-58 psi) band and uses a 40 um element, with a metal bowl and both semi-auto and manual drains fitted.
Because the filter and regulator share one housing, this unit replaces a separate GAF filter plus GAR regulator, which means fewer joints to seal and less rail width than two parts. The pressed-in self-locking knob resists set-pressure drift from vibration, and the circular gauge with clip and magnifier shows the outlet pressure on an MPa/psi scale.
Airtac GAFR Adjustable Filter Regulator GAFR300C15LJK Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C15LJK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR300C15LJK
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR300C15LJK Is Used
Low-pressure jig actuation
Feed a single clamping jig or a small indexing fixture that runs on a regulated 0.15-0.4 MPa circuit, where the metal bowl resists rough handling and the 1/2in port keeps the supply line short.
Bench test rigs
Supply a test bench with a clean, stable air supply for gauges or leak-test tooling that needs a lower pressure ceiling, using the fitted gauge to verify the setpoint directly.
Light assembly stations
Protect a single pneumatic screwdriver or a small parts feeder on an assembly line, where the 40 um element filters particles and the semi-auto drain lets an operator clear condensate on schedule.
Is the Airtac GAFR Adjustable Filter Regulator GAFR300C15LJK the Right Air-Prep Unit?
Choose the GAFR300 body for 1/2in ports and a 60 cc condensate bowl, which holds about 2.4x the condensate of the GAFR200's 25 cc bowl, so it needs draining less often. The metal bowl is a build choice for the environment, though the 1.0 MPa maximum and -5 to 70 C temperature range are identical across all bowl materials, so confirm compatibility for aggressive surroundings. This model has no mounting bracket (J), so plan for a panel mount or an existing bracket, and it includes the reverse-flow (reflux) valve as an ordering difference. The lower-pressure type tops out at 0.4 MPa, so if the machine may ever need more, the standard type is the right part; the semi-auto and manual drains are both fitted here, and the 40 um element suits general shop air. If the line needs oil downstream, order the matching GAFC300-15 combination instead, since this unit does not lubricate. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (1/2" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 60 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 500 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR300C15LJK FAQ
The GAFR300C15LJK is a filter and regulator with a 1/2in port, a 60 cc condensate bowl, and a weight of 500 g. It operates in the lower pressure range of 0.15-0.4 MPa (20-58 psi), with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, and it must not freeze.
The K in GAFR300C15LJK indicates that a reverse-flow (reflux) valve is fitted. This is an ordering difference from models without the K code; the catalogue defers the function of this valve to a separate page, so no operational details are specified here.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR300C15LJK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.