Airtac GAFR Adjustable Filter Regulator GAFR40010LW
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR40010LW is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size3/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialPC
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight880 g
About the Airtac GAFR Adjustable Filter Regulator GAFR40010LW
The GAFR40010LW is a filter and regulator combined into one body, so the incoming air is cleaned and then set to a steady pressure without needing separate parts. This unit has a 3/8in port, works in the lower 0.15-0.4 MPa (20-58 psi) range, and uses a 5 um element to trap fine particles.
Its 100 cc condensate bowl collects the water and solids spun out by the diversion structure, and the 880 g mass shows this is a substantial mid-size unit that needs a proper mount. The circular gauge with MPa/psi scale is fitted, and the mounting bracket is included in the box.
Airtac GAFR Adjustable Filter Regulator GAFR40010LW Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR40010LW |
|---|---|
| Series | GAFR400 filter & regulator |
| Port size | 3/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Bracket | Included |
| Weight | 880 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR40010LW
| GAFR400 | GA400 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC400-10 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR400 · 3/8" · curve to 7000 L/min |
|---|---|
| One size down | GAFR300 |
| One size up | GAFR500 (curve to 8000 L/min) |
| Add a lubricator | GAFC400-10 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR40010LW Is Used
Instrument air for a precision fixture
Feed a 5 um filtered, regulated supply to a pneumatic fixture that holds tight tolerances, where the lower pressure range protects delicate components.
Lab bench air supply
Provide a stable, filtered air source for a laboratory setup that requires a gentle, controlled pressure below 0.4 MPa for experiments or testing.
Single-station automation cell
Supply a compact automation cell with one or two actuators, where the 3/8in port and 100 cc bowl are sized for moderate air consumption.
Is the Airtac GAFR Adjustable Filter Regulator GAFR40010LW the Right Air-Prep Unit?
Choose this GAFR400 body when a 3/8in port and a 100 cc drain bowl match the air demand of your station. The 5 um element suits precision valves or instrument lines, though it will need service more often than a 40 um element. The lower-pressure L type tops out at 0.4 MPa, so confirm your machine never needs more than that. The semi-auto and manual drains are both fitted, the PC bowl is the standard build, and the bracket is included. If oil is needed downstream, order the matching GAFC400-10 combination instead. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (3/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 100 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 880 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC400-10 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR40010LW FAQ
The GAFR40010LW is a filter & regulator with a 3/8in port. Its working pressure range is 0.15-0.4 MPa (20-58 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It has a 100 cc drain bowl and weighs 880 g.
The 'L' in the code means lower-pressure type, with a maximum regulated output of 0.4 MPa instead of the standard 0.9 MPa. This is for applications that need a gentle, precise pressure and never require more. If your machine might need more pressure later, the standard 'S' type would be the safer choice.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR40010LW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.