Airtac GAFR Adjustable Filter Regulator GAFR400C10LJK
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR400C10LJK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size3/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight880 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFR Adjustable Filter Regulator GAFR400C10LJK
The GAFR400C10LJK is a filter and pressure regulator combined in a single body, eliminating the need for separate GAF and GAR units. It spins incoming air to separate liquid water and trap solid particles, then delivers a steady outlet pressure through a balanced mechanism; the pressed-in self-locking knob resists drift from vibration.
This model has a 3/8" port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 40 um element. The metal bowl holds 100 cc of condensate, and the unit weighs 880 g, placing it in the GAFR400 size class that suits medium-flow machine circuits.
Airtac GAFR Adjustable Filter Regulator GAFR400C10LJK Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR400C10LJK |
|---|---|
| Series | GAFR400 filter & regulator |
| Port size | 3/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Bracket | Not included (J) |
| Weight | 880 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR400C10LJK
| GAFR400 | GA400 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC400-10 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR400 · 3/8" · curve to 7000 L/min |
|---|---|
| One size down | GAFR300 |
| One size up | GAFR500 (curve to 8000 L/min) |
| Add a lubricator | GAFC400-10 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR400C10LJK Is Used
Precision valve control
Feed a bank of precision pneumatic valves on a pick-and-place machine where the lower 0.4 MPa ceiling prevents over-pressuring sensitive actuators.
Machine tool coolant lines
Protect a machining center's pneumatic clamping circuit from water and particulates, with the metal bowl handling shop-floor conditions.
Test bench air supply
Supply a lab test fixture with clean, regulated air at a stable low pressure, using the 100 cc bowl to extend time between manual drains.
Is the Airtac GAFR Adjustable Filter Regulator GAFR400C10LJK the Right Air-Prep Unit?
Choose the GAFR400 body for lines needing up to 7000 L/min plotted flow at 0.7 MPa inlet, a step up from the GAFR300's 3500 L/min envelope. The metal bowl (C) is a build choice for the environment; the semi-auto plus manual drain requires an operator to check the 100 cc bowl, while an A code would automate that task. The L type tops out at 0.4 MPa, so verify the machine never needs more; the J code means no bracket is included, and the fitted gauge reads MPa/psi on PT threads. The K code adds a reverse-flow (reflux) valve as an ordering difference. If oil is needed downstream, order the matching GAFC400-10 combination instead. For this unit, 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (3/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 100 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 880 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC400-10 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR400C10LJK FAQ
Pressure range is 0.15-0.4 MPa (20-58 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature -5 to 70 C. The drain bowl holds 100 cc, the unit weighs 880 g, and the port is 3/8".
The K code indicates a reverse-flow (reflux) valve is fitted. It is an ordering difference from the standard version; the catalogue defers its function to a separate page, so no operational details are provided here.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR400C10LJK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.