Airtac GAR Air Regulator GAR60025SJ
The AirTAC Airtac GAR Air Regulator GAR60025SJ is a genuine compressed-air pressure regulator. It sets and holds a steady downstream pressure across the 0.05 - 0.9 MPa range, with 1" ports and a built-in circular pressure gauge. It regulates pressure only — it does not filter the air or remove water.
- TypeAir regulator
- Port size1"
- Pressure range0.05 - 0.9 MPa
- RegulationStandard
- GaugeCircular
- Reflux valveNo
- Max pressure1.0 MPa
- Weight1390 g
About the Airtac GAR Air Regulator GAR60025SJ
The GAR60025SJ is an air pressure regulator that takes a higher supply pressure and holds a steady, lower downstream pressure you set with the knob and read on the circular gauge. It regulates pressure only; it does not filter the air, remove water, or separate particles, and it has no drain bowl or filter element.
This standard-type unit has a 1in port and weighs 1390 g, placing it in the largest GAR size class for high-demand machine headers. The pressed-in self-locking knob prevents the set pressure from drifting due to vibration or accidental knocks, so your downstream equipment sees a stable setting.
Airtac GAR Air Regulator GAR60025SJ Technical Specifications
| Model | Airtac GAR Air Regulator GAR60025SJ |
|---|---|
| Series | GAR600 air regulator |
| Port size | 1" (PT thread) |
| Regulation type | Standard |
| Pressure range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure gauge | Circular, MPa / psi scale |
| Bracket | Not included (J) |
| Reflux valve | None |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -20 to +70 °C |
| Adjustment | Self-locking press-in knob |
| Mounting | Panel + optional bracket |
| Weight | 1390 g |
Specifications follow the official AirTAC GAR catalogue (pages 228-229). This is a regulator only — it sets and holds a downstream pressure but does not filter the air or separate water. To clean the air as well, use the matching GAFR600 filter-regulator or add a GAF filter upstream. Never run above the 1.5 MPa (215 psi) proof pressure.
Model Code: Airtac GAR Air Regulator GAR60025SJ
| GAR600 | GA600 series air regulator — sets the port range and weight class. |
|---|---|
| 25 | Port size 1". This body offers 20 = 3/4", 25 = 1". |
| S | Standard regulation: 0.05 - 0.9 MPa (7 - 130 psi). This body offers S (standard) only. |
| J | No bracket (J) — panel mount or existing bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow (reflux) valve. |
A GAR regulates pressure but does not filter — there is no bowl, element or drain code. Need to clean the air too? The matching GAFR600-25 is the same regulator with a built-in filter.
Size Class
- GAR2001/8"-1/4" · 170 g
- GAR3001/4"-1/2" · 300 g
- GAR4003/8"-1/2" · 570 g
- GAR5003/4" · 580 g
- GAR6003/4"-1" · 1390 g
All bodies share the same 0.05-0.9 MPa (S) regulated range, 1.0 MPa max and 1.5 MPa proof; the body number sets the port size and the flow the regulator can pass. Bigger ports feed higher air demand. The catalogue plots a flow curve at 0.7 MPa inlet but prints no numeric envelope, so size by port and weight and confirm the curve for a real duty point.
| This model | GAR600 · 1" · 1390 g |
|---|---|
| One size down | GAR500 |
| Add filtration | GAFR600-25 (filter + regulator) |
Where the Airtac GAR Air Regulator GAR60025SJ Is Used
Machine header supply
Set a stable 0.6 MPa for a multi-station assembly machine header, ensuring each pneumatic actuator receives consistent pressure despite upstream fluctuations.
High-flow blow-off station
Regulate a 1in line feeding a parts-cleaning blow-off manifold, holding a steady 0.5 MPa for consistent debris removal across multiple nozzles.
Test bench reference
Provide a precise, adjustable pressure reference for a hydraulic or pneumatic test bench, where a stable 0.7 MPa is needed for repeatable component testing.
Is the Airtac GAR Air Regulator GAR60025SJ the Right Regulator?
Choose the GAR60025SJ when you need a 1in port regulator for a high-flow line. The J in the code means the mounting bracket is omitted, so plan for panel mounting or use an existing bracket. The standard S type regulates from 0.05-0.9 MPa (7-130 psi), which covers most industrial machines, unlike the lower-pressure L type that tops out at 0.4 MPa. The fitted circular gauge reads MPa/psi, matching the PT thread standard. If your line also needs clean air, install a GAF filter upstream or use the matching GAFR600-25 filter-regulator instead, since this GAR does not clean the air. The S type's adjustable band of 0.85 MPa is about 2.4x the L type's 0.35 MPa span, giving you a wider range of setpoints for varied applications.
Quick checklist
- ✓ Body size for your air demand (1" here)
- ✓ Type S (0.05-0.9) or L (0.05-0.4 MPa)
- ✓ Gauge fitted, or no gauge (N)
- ✓ Thread PT / G / NPT (sets gauge scale)
- ✓ Bracket kept or removed (J)
- ✓ Need filtration too? Use GAFR600
Installation & Setting Notes
- check Install with the airflow arrow: IN to OUT, knob accessible.
- check Put a filter (GAF or a GAFR) UPSTREAM — a regulator does not clean the air.
- check Set pressure by turning the knob up to the target, then press it in to lock.
- check Keep supply at or below the 1.0 MPa (145 psi) max working pressure.
- check Never exceed the 1.5 MPa (215 psi) proof pressure.
- check Support the 1390 g unit on its panel or bracket, not on the tubing.
This is a regulator only — it sets and holds pressure but does not filter or lubricate. Add a GAF filter, a GAL lubricator, or step up to the GAFR600-25 filter-regulator as your air-prep needs grow.
Airtac GAR Air Regulator GAR60025SJ FAQ
The GAR60025SJ is a standard-type air pressure regulator with a 1in port and a weight of 1390 g. It regulates pressure from 0.05-0.9 MPa (7-130 psi). Maximum supply pressure is 1.0 MPa (145 psi), and proof pressure is 1.5 MPa (215 psi). The operating temperature range is -20 to 70 C. It comes with a circular gauge reading MPa/psi and does not include a mounting bracket.
The J indicates the mounting bracket is not included. This is for installations where the regulator will be panel-mounted or attached to an existing bracket structure. The regulator itself is identical to the version with a bracket; only the included accessories differ.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAR Air Regulator GAR60025SJ
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.