Airtac GAR Air Regulator GAR60025SN
The AirTAC Airtac GAR Air Regulator GAR60025SN is a genuine compressed-air pressure regulator. It sets and holds a steady downstream pressure across the 0.05 - 0.9 MPa range, with 1" ports and a no-gauge (N) port for a panel gauge. It regulates pressure only — it does not filter the air or remove water.
- TypeAir regulator
- Port size1"
- Pressure range0.05 - 0.9 MPa
- RegulationStandard
- GaugeNone (N)
- Reflux valveNo
- Max pressure1.0 MPa
- Weight1390 g
About the Airtac GAR Air Regulator GAR60025SN
The GAR60025SN is a regulator-only unit that takes a higher supply pressure and holds a steady, lower downstream pressure you set with its knob. It does not filter, clean, dry, or remove water or particles from the air - it only regulates pressure.
This model has a 1 inch port and weighs 1390 g, placing it in the largest GAR size class for high-demand machine headers. It is the standard type, regulating from 0.05-0.9 MPa (7-130 psi), and comes without a gauge so you read pressure on the line's own panel gauge.
Airtac GAR Air Regulator GAR60025SN Technical Specifications
| Model | Airtac GAR Air Regulator GAR60025SN |
|---|---|
| Series | GAR600 air regulator |
| Port size | 1" (PT thread) |
| Regulation type | Standard |
| Pressure range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure gauge | None (N) — MPa / psi port |
| Bracket | Included |
| Reflux valve | None |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -20 to +70 °C |
| Adjustment | Self-locking press-in knob |
| Mounting | Panel + optional bracket |
| Weight | 1390 g |
Specifications follow the official AirTAC GAR catalogue (pages 228-229). This is a regulator only — it sets and holds a downstream pressure but does not filter the air or separate water. To clean the air as well, use the matching GAFR600 filter-regulator or add a GAF filter upstream. Never run above the 1.5 MPa (215 psi) proof pressure.
Model Code: Airtac GAR Air Regulator GAR60025SN
| GAR600 | GA600 series air regulator — sets the port range and weight class. |
|---|---|
| 25 | Port size 1". This body offers 20 = 3/4", 25 = 1". |
| S | Standard regulation: 0.05 - 0.9 MPa (7 - 130 psi). This body offers S (standard) only. |
| (blank) | Mounting bracket included. |
| N | No gauge (N) — for a line with a panel gauge already. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow (reflux) valve. |
A GAR regulates pressure but does not filter — there is no bowl, element or drain code. Need to clean the air too? The matching GAFR600-25 is the same regulator with a built-in filter.
Size Class
- GAR2001/8"-1/4" · 170 g
- GAR3001/4"-1/2" · 300 g
- GAR4003/8"-1/2" · 570 g
- GAR5003/4" · 580 g
- GAR6003/4"-1" · 1390 g
All bodies share the same 0.05-0.9 MPa (S) regulated range, 1.0 MPa max and 1.5 MPa proof; the body number sets the port size and the flow the regulator can pass. Bigger ports feed higher air demand. The catalogue plots a flow curve at 0.7 MPa inlet but prints no numeric envelope, so size by port and weight and confirm the curve for a real duty point.
| This model | GAR600 · 1" · 1390 g |
|---|---|
| One size down | GAR500 |
| Add filtration | GAFR600-25 (filter + regulator) |
Where the Airtac GAR Air Regulator GAR60025SN Is Used
Machine air header
Set a stable 0.6 MPa supply for a multi-station assembly machine where several cylinders and tools draw from one 1in line.
High-flow pneumatic press
Regulate the actuation pressure for a large press or forming station that needs consistent force despite upstream supply swings.
Plant-wide distribution point
Mount at a branch header to hold a steady pressure for a conveyor drive system or a bank of air tools fed from a single 1in pipe.
Is the Airtac GAR Air Regulator GAR60025SN the Right Regulator?
Choose the GAR600 for a 1 inch line feeding a machine header or multi-station system; it is the heaviest body at 1390 g, about 2.4x the mass of the GAR500 at 580 g. The standard S type regulates 0.05-0.9 MPa (7-130 psi), while the lower L type only reaches 0.4 MPa - so S suits typical factory pressures. This unit has no gauge (N), so fit a panel gauge on the downstream line, and the included bracket supports its weight properly. The PT thread reads MPa/psi on any gauge you add. If the air also needs cleaning, use a GAFR filter-regulator or a GAF filter upstream. The S type's 0.05-0.9 MPa band is about 2.4x the span of the L type's 0.05-0.4 MPa range.
Quick checklist
- ✓ Body size for your air demand (1" here)
- ✓ Type S (0.05-0.9) or L (0.05-0.4 MPa)
- ✓ Gauge fitted, or no gauge (N)
- ✓ Thread PT / G / NPT (sets gauge scale)
- ✓ Bracket kept or removed (J)
- ✓ Need filtration too? Use GAFR600
Installation & Setting Notes
- check Install with the airflow arrow: IN to OUT, knob accessible.
- check Put a filter (GAF or a GAFR) UPSTREAM — a regulator does not clean the air.
- check Set pressure by turning the knob up to the target, then press it in to lock.
- check Keep supply at or below the 1.0 MPa (145 psi) max working pressure.
- check Never exceed the 1.5 MPa (215 psi) proof pressure.
- check Support the 1390 g unit on its panel or bracket, not on the tubing.
This is a regulator only — it sets and holds pressure but does not filter or lubricate. Add a GAF filter, a GAL lubricator, or step up to the GAFR600-25 filter-regulator as your air-prep needs grow.
Airtac GAR Air Regulator GAR60025SN FAQ
The GAR60025SN regulates air from 0.05-0.9 MPa (7-130 psi), with a maximum supply pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -20 to 70 C and weighs 1390 g with a 1in port.
The N in GAR60025SN means no pressure gauge is fitted. You read the downstream pressure on the line's own panel gauge instead, which is useful when the regulator mounts in a tight space or where a separate gauge already exists.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAR Air Regulator GAR60025SN
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.