AirTAC GC200-08 FRL Unit (GC20008F3)
The AirTAC AirTAC GC200-08 FRL Unit (GC20008F3) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GC200-08 FRL Unit (GC20008F3)
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, a pressure regulator and a lubricator working together so one assembly cleans the compressed air, holds a set downstream pressure and adds oil mist for air tools and cylinders. This GC20008F3 is the 200 size with a 1/4 in PT port, a differential-pressure drain on the filter bowl, the standard 40 um filter element, and an embedded square pressure gauge scaled in bar.
This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes with a choice of ports, threads, drains, filter grades and gauge scales; maximum working pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C (non-freezing). The 200-size bowls are polycarbonate (PC). Because published flow data is given as curves rather than a single rating, we confirm flow and datasheet figures for your application on request.
AirTAC GC200-08 FRL Unit (GC20008F3) Technical Specifications
| Model | AirTAC GC200-08 FRL Unit (GC20008F3) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GC200-08 FRL Unit (GC20008F3)
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Where the AirTAC GC200-08 FRL Unit (GC20008F3) Is Used
Lab automation actuation
Supplies conditioned air to the pneumatic actuators of a laboratory sample-handling rig, with the bar-scale gauge matching the rest of the instrument panel.
Process valve actuation skid
Feeds quarter-turn pneumatic valve actuators on a small process skid, keeping water and particulates out of the positioner and solenoid valves.
Maintenance shop drop
A tidy FRL point at a workshop air drop, giving technicians filtered, regulated and lubricated air for ratchets, grinders and blow guns.
Is the AirTAC GC200-08 FRL Unit (GC20008F3) the Right Station?
Step up or down through the 200/300/400/600 sizes and their matched ports as your air demand grows - the 200 body with a 1/4 in port suits lighter duty lines. Drain choice is yours: differential-pressure (as decoded here), automatic, or manual. The 40 um element decoded here is the standard grade for general plant air; the 5 um W option exists for more sensitive downstream valves. The embedded square gauge is included in a bar scale, with MPa and psi scales on other codes. PT is the standard thread; G (BSPP) and NPT are catalogue options you can order.
Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC GC200-08 FRL Unit (GC20008F3) FAQ
AirTAC publishes flow for the G series as curves rather than a single rated figure, so no single number would be accurate. Send us your application conditions and we will confirm the correct size from the datasheet before you order.
The GC is a three-piece set - separate filter, regulator and lubricator - so each element can be serviced or replaced on its own and the layout can be piped to suit your machine. If you prefer a compact two-piece filter-regulator plus lubricator, that is the GFC family, and the GFR covers filter and regulation only.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GC200-08 FRL Unit (GC20008F3)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.