AirTAC GC200-08 FRL Unit (GC20008MC3)
The AirTAC AirTAC GC200-08 FRL Unit (GC20008MC3) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GC200-08 FRL Unit (GC20008MC3)
GC20008MC3 is an AirTAC G-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator supplied as a matched 200-size set. This configuration is threaded PT1/4 (1/4 in PT, with G and NPT available as catalogue options), carries the standard 40 um filter element, uses the default differential-pressure drain on the filter bowl, and includes a round pressure gauge with bar scale. In use, the filter removes water and particulate, the regulator holds downstream pressure steady, and the lubricator meters oil mist into the air line.
This is a genuine AirTAC part. The G series is offered in 200, 300, 400 and 600 sizes covering progressively larger ports and flow, with automatic, manual or differential-pressure draining, a 5 um fine-filtration option (W), gauge scale choices and G (BSPP) or NPT threads. Rated-flow figures are published as curves rather than a single number, so we confirm sizing and datasheet values on request.
AirTAC GC200-08 FRL Unit (GC20008MC3) Technical Specifications
| Model | AirTAC GC200-08 FRL Unit (GC20008MC3) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GC200-08 FRL Unit (GC20008MC3)
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Where the AirTAC GC200-08 FRL Unit (GC20008MC3) Is Used
Textile machine air jets and cylinders
General air preparation on a weaving or knitting line, where the differential-pressure drain keeps the bowl clear through long production runs without operator attention.
Wire and cable machinery pneumatics
Filtered, regulated and lubricated air for the capstan brakes, air clutches and guide cylinders on a cable extrusion line, read in bar to match the machine's original European gauges.
Maintenance-shop air drops
A 1/4 in regulated drop at a plant maintenance bench feeding hand tools and test fittings, with the bar-scale gauge read alongside standard shop instruments.
Is the AirTAC GC200-08 FRL Unit (GC20008MC3) the Right Station?
Size and port step up together: the 200 body with 1/4 in PT suits compact supply lines, while 300, 400 and 600 sizes serve higher-demand circuits - match the step to the flow your line needs. The differential-pressure drain clears the bowl automatically as the element loads, with manual (M) and automatic (A) draining as alternatives. The standard 40 um element protects most actuators and valves; specify the W option for 5 um fine filtration. The round gauge here reads in bar; MPa and psi scales are orderable. PT thread is standard on this code; G (BSPP) and NPT are catalogue options. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC GC200-08 FRL Unit (GC20008MC3) FAQ
No single rated figure exists to quote: AirTAC publishes G-series performance as flow curves rather than one number. Send your operating pressure and consumption requirement and we will confirm sizing from the datasheet on request.
The default drain bleeds the filter bowl automatically as the pressure differential across the element builds, so no operator intervention is needed. If you prefer scheduled manual draining or fully automatic draining, the M and A variants are available in the same size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GC200-08 FRL Unit (GC20008MC3)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.