AirTAC GC200-08 FRL Unit (GC20008MF3)
The AirTAC AirTAC GC200-08 FRL Unit (GC20008MF3) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GC200-08 FRL Unit (GC20008MF3)
GC20008MF3 is an AirTAC G-series three-unit F.R.L. combination: a separate filter, regulator and lubricator supplied as one matched set. At size 200 with a PT1/4 port it removes water and particulate at the standard 40 um grade, holds a steady regulated pressure and feeds oil mist to the downstream circuit. The filter bowl carries a manual drain, and the embedded square gauge reads in bar to suit metric-spec machinery and European-style drawings.
This is a genuine AirTAC part. The G-series covers sizes 200 to 600 with ports from 1/8 to 1 inch; across the range you can order 5 um fine filtration, automatic or differential-pressure drains, MPa, psi or bar gauge scales, G (BSPP) and NPT threads, and a low-pressure regulator type. Flow appears in the catalogue as curves rather than a single rating, so we confirm datasheet figures for your application on request.
AirTAC GC200-08 FRL Unit (GC20008MF3) Technical Specifications
| Model | AirTAC GC200-08 FRL Unit (GC20008MF3) |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GC200-08 FRL Unit (GC20008MF3)
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Where the AirTAC GC200-08 FRL Unit (GC20008MF3) Is Used
Textile machine air prep
Conditions the machine-air feed on looms and winding heads, where the bar-scaled gauge matches the metric pressure settings on the machine datasheet.
Conveyor actuator supply
Filters, regulates and lubricates the air feeding conveyor diverters, gate cylinders and hold-down clamps on a packaging or sorting line.
Workshop multi-station header
Installed upstream of a 1/4 inch manifold that serves several air tools and blow-off points in a general repair workshop.
Is the AirTAC GC200-08 FRL Unit (GC20008MF3) the Right Station?
Size 200 with the 1/4 inch port is the compact step of the range - move to GC300/400/600 when larger ports and higher flow are needed. The 40 um standard element suits general machine air; select a W-code 5 um set where finer filtration is required. The manual drain suits bowls that are checked on a routine walk; automatic and differential-pressure drain codes exist for unmanned or awkward locations.
This version's square embedded gauge is scaled in bar; MPa and psi scales are alternative codes. Thread is PT as standard with G (BSPP) and NPT orderable. Since flow is published as curves rather than a single rated number, ask us to check your required flow and pressure against the datasheet before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC GC200-08 FRL Unit (GC20008MF3) FAQ
G-series flow is published as curves, not as a single rated figure, so we do not quote a number here. Give us your required flow and upstream pressure and we will confirm the applicable datasheet curve values for the GC200 size on request.
The M code here is a manual drain: someone bleeds the filter bowl by hand, which suits accessible installations on a maintenance route. If the set will sit in an unmanned or hard-to-reach spot, choose an automatic (A) or differential-pressure (blank) drain code instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GC200-08 FRL Unit (GC20008MF3)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.