Airtac GC FRL Unit GC200C06F1WK
The AirTAC Airtac GC FRL Unit GC200C06F1WK is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC200C06F1WK
The AirTAC GC series is a three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator arranged in the correct order, each unit serviceable on its own. This version is the 200 size with PT1/8 ports, the 5 um filter element (W option) and a differential-pressure drain on the polycarbonate filter bowl. An embedded square gauge on the regulator reads in MPa, and a reverse-flow check valve (K) is fitted to stop backflow through the set. It runs on compressed air at up to 1.0 MPa (145 psi) from -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC range covers 200, 300, 400 and 600 sizes with manual or automatic drain options, 40 um or 5 um elements, MPa/psi/bar gauge scales, G (BSPP) and NPT threads to order. Because flow is published as curves rather than a single rating, we will confirm the datasheet figures for your application on request.
Airtac GC FRL Unit GC200C06F1WK Technical Specifications
| Model | Airtac GC FRL Unit GC200C06F1WK |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC200C06F1WK
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC200C06F1WK Is Used
Textile loom air supply
Conditions the air feeding loom jets and cylinders on a weaving line, with the check valve holding the set against backflow.
Fixture clamping circuit
Regulated, filtered and oiled air to the swing clamps of a machining fixture, sized for the PT1/8 tap.
Maintenance workbench
A point-of-use F.R.L. at a plant maintenance bench feeding air tools and small actuators.
Is the Airtac GC FRL Unit GC200C06F1WK the Right Station?
The 200 size with PT1/8 ports is the smallest step in the range; step to 300/400/600 for larger ports and flow. The W element gives 5 um filtration instead of the 40 um standard, and the K suffix adds the check valve, useful where backflow through the set must be prevented. The differential-pressure drain is fitted; manual and automatic drain codes are available. The embedded square gauge reads MPa, with psi and bar scale options, and G or NPT threads can be ordered in place of PT.
Flow is given as curves, not as one rated number, so let us confirm the sizing against the datasheet for your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
Airtac GC FRL Unit GC200C06F1WK FAQ
There is no single rated flow figure for the GC series; AirTAC publishes flow as curves. Send us your application and we will confirm the relevant flow and other datasheet figures on request before you order.
K adds a reverse-flow (check) valve so air cannot flow backwards through the combination. Filtration grade, drain type, gauge and regulation are otherwise the same as the identical code without the K.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC200C06F1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.